Magazine Articles, Proceedings

Complete list of Articles

Banaschik, R.; Herholz, H.; Henkel, K.-M.:
Filler wire electrodes for electro-gas welding in the European economic area - current state of development
In: Schweißen und Schneiden 67(2015)5, pp 245-249

Blunk, C.; Glienke, R.; Wanner, M.-C.:
Reducing costs, increasing efficiency
In: DVS reports vol. 315, pp 789-794, 2015, ISBN 978-3-945023-46-4

Denkert, C.; Süße, D.:
Using the F-element for the correct bolted joint
In: proceedings: 16. Round Table “Simulating Manufacturing”, 16 p, 2015, ISBN 978-3981381443

Denkert, C.; Wanner, M.-C.; Glienke, R.; Busch, M.:
Hybrid joints - using preloading and bonding intelligently
In: Proceedings TechnoBond, 2nd Industrial Gluing Technology symposium, pp 144-148, 2015

Fröck, L.:
Joining of pipework by bonding in shipbuilding
In: Ingenieur-Spiegel (2015)2, pp 71-72

Fröck, L.; Glück, N.; Nagel, C.:
Joining of metal pipes in shipbuilding by bonding (part 1)
In: adhäsion 59(2015)10, pp 42-47

Fröck, L.; Nagel, C.:
Joining of pipework by bonding in shipbuilding
In: DVS reports vol. 315, pp 149-152, 2015, ISBN 978-3-945023-46-4

Fröck, L.; Nagel, C.; Brede, M.; Glück, N.:
Dimensioning on the basis of analytical methods

In: adhäsion 59(2015)12, pp 38.43

Fröck, L.; Nagel, C.; Brede, M.; Glück, N.:
Determination and validation of indicators

In: adhäsion 59(2015)11, pp 36-41

Fröck, L.; Wanner, M.-C.:
Joining of pipework by bonding in shipbuilding

In: Proceedings TechnoBond, 2nd Industrial Gluing Technology symposium, pp 162-165, 2015

Fuchs, N.; Wanner, M.-C.:
Recording and evaluation of the tension state of bolted connections by acoustic resonance analysis

In: TM – Technisches Messen 82(2015)10, pp 526-535

Geist, M.; Meister, M.; Knaack, L.; Gierschner, F.:
Local modelling for the determination of surface shape discrepancies using a terrestrial laser scanner

In: Photogrammetry-laser scanning-optical 3D measuring technology. Contributions of the Oldenburger 3D days, pp 2-13, 2015, ISBN 978-3879075539

Gericke, A.; Banaschik, R.; Henkel, K.-M.:
Increase in toughness through melt bath vibration of submerged arc-welded fine-grain construction steels

In: Proceedings DVS reports 315, pp 695-700, 2015

Gierschner, F.; Geist, M.; Knaack,L.; Meister, M.:
Partially automated quality control in construction of structural steelwork using laser scanners

In: Proceedings Go-3D Computer graphics in practice, pp 129-140, 2015

Glienke, R.; Blunk, C.; Denkert, C.; Wanner, M.-C.:
Dimensioning and execution of joints with lockbolts in structural steelwork

In: Stahlbau 84(2015)12, pp 980-997

Glienke, R.; Ebert, A.; Wanner, M.-C.:
Requirements for mechanical joining technology for wind turbine towers using structural steelwork and with large hub heights

In: Stahlbau 84(2015)8, pp 556-570

Glück, N.:
High-frequency testing of FRP accelerates component testing

In: Materialkompass (2015)1, p. 11

Glück, N.:
Optimisation of the application of force in trusses made of composites

In: Proceedings German aerospace congress, 10 p., 2015

Glück, N.; Schumann, M.:
Development of 3D strand laying technology for ultra-lightweight large-scale structures for marine structure

Proceedings International Conference on Lightweight Design of Marine Structures (LIMAS), pp 151-156, 2015

Grenzdörffer, G. J.; Naumann, M.; Niemeyer, F.; Frank, A.:
Symbiosis of UAS Photogrammetry and TLS for Surveying and 3D Modeling of Cultural Heritage Monuments - a Case Study about the Cathedral of St. Nicholas in the City of Greifswald

In: The International Archives Photogrammetry Remote Sensing Spatial Information Sciences, XL-1/W4, pp 91–96 DOI: 10.5194/isprsarchives-XL-1-W4-91-2015

Hauer, M.; Gärtner, F.:
Innovative rudder coatings through cold gas spraying processes

In: Schiff & Hafen 67(2015)12, pp 44-45

Herholz, H.; Dryba, S.; Gründler, M.; Wanner, M.-C.:
Application of small robots in GMA welding of large tubular nodes

In: Proceedings DVS reports vol. 317, pp 76-80, 2015

Knaack, L.: Geist, M.; Gierschner, F.; Meister, M.:
Use of laser scanners in construction of structural steelwork

In: Schiff & Hafen 67(2015)8, pp 36-39

Meißner, J.-P.; Schulz, J.-P.; König, A.; Fleßner, H.:
New team in simulation - robots and optical sensors

In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (2015)3, pp 94-97

Meißner, J.; Sender, J.; Weidemann, B.; Wanner, M.-C.:
Simulation Environment for the Integration of 3D-Sensors into Automated Maritime Production Facilities

In: Proceedings 14th International Conference on Computer and IT Applications in the Maritime Industries, Ulrichshusen, 11-13 May 2015, pp 556-562

Nehls, T.; Wanner, M.-C.; Landgrebe, D.; Kropp, T.:
Numerical and experimental investigation of settling process irregularities with lockbolt systems

In: Proceedings Joint research in mechanical joining technology, pp 51-57, 2015

Staschko, R.; Fuchs, N.; Glück, N.:
Damage in the semi-hollow punch riveting process in hybrid FRP joints

In: Joining Plastics – Fügen von Kunststoffen 9(2015)3-4, pp 204-211

Stranghöner, N.; Afzali, N.; Berg, J.; Schiborr, M.; Bijlaard, F.; Gresnigt, N.; De Fries, P.; Glienke, R.; Ebert, A.:
Influence of different testing criteria on the slip factor of slip-resistant connections

In: Conference Paper 13th Nordic Steel Construction Conference, Tampere, Finnland, 23.-25.09.2015

Wanner, M.-C.; Glück, N.; Schumann, M.; Schornstein, B.:
Truss-type lightweight structures made of FRP

In: wt Werkstattstechnik 105(2015)9, pp 580-585

Banaschik, R.; Herholz, H.; Henkel, K.-M.:
Metallurgical impact on welding results of electrogas-welded butt joints via cold wire lead.
In: DVS Congress 2014, Big Welding Technology Conference (DVS-reports vol. 306), Düsseldorf, DVS Media GmbH, ISBN 978-3-945023-03-7, pp. 268-274, 2014

Denkert, C.; Süße, D.:
Load limit of function element screw joints.
In: Conference report vol. 4. Joint colloquy of joint technologies 2014 'Joint research on mechanical joint technologies', Conference report T39, EFB Hanover, pp. 83-89, 2014

Denkert, C.; Süße, D.:
Sheet metal thread racks − From insertion to failure.
In: Conference report vol. 15. Roundtable "Simulating Manufacturing", Marburg, Simufact Engineering, ISBN 978-3-981381-43-6, pp. 1-10, 2014

Ebert, A.; Glienke, R.; Wanner, M.-C.:
Recent requirements on mechanical jointing within steel and lightweight metal construction for solar and wind energy plants.
In: DVS Congress 2014, Big Welding Technology Conference (DVS-reports vol. 306), Düsseldorf, DVS Media GmbH, ISBN 978-3-945023-03-7, pp. 210-220, 2014

Glienke, R.; Blunk, C.:
Change within connection technology.
The lock bolt within steel construction. In: German Engineer Journal (July-August), Hanover, Schiele and Schön, pp. 12-19, 2014

Glienke, R.; Stranghöner, N.; Schiborr, M.:
Procedure test of slip-resistant connections according to EN 1090-2.
Contribution to EUROSTEEL 2014, 7th European Conference on Steel and Composite Structures, Napoli, pp. 12-19, 2014

Grewe, O.; Geist, M.:
Reverse engineering of ship structures.
In: HANSA International Maritime Journal (5), pp. 30-34, 2014

Irmer, M.; Momber, A.; Glück, N.:
Evaluation of organic surface protection systems in arctic offshore use.
In: Conference report of conference n. 13: Corrosion prevention within ship techonologies, Hamburg, DNV GL, GfKORR- Society of corrosion prevention, Society for shipbuilding technologies, ISBN 978-3-935406-53-6, pp. 5-20, 2014

Irmer, M.; Momber, A.; Glück, N.:
Coating systems: properties amidst arctic conditions.
In: Ship & Harbour (9), Hamburg, DVV Media Group GmbH, ISBN 0938-1643, pp. 180-185, 2014

Meißner, J.; Sender, J.; Schulz, J.-P.; König, A.:
Virtual protection of optical 3D sensors.
Selection and positioning of optical 3D-sensors in automated production plants. In: Productivity Management (2), Berlin, Gito mbH Verlag, ISSN 1868-8519, pp. 31-34, 2014

Momber, A.; Irmer, M.; Glück, N.:
Offshore coatings for low-temperature applications.
In: European Coatings Conference-Marine Coatings (March, 4-5 2014, Düsseldorf), Hanover, Vincentz Network GmbH & Co. KG, pp. 121-130, 2014

Schumann, M.; Büchler, D.; Fechner, M.:
Development of strand-laying-CFRP bridge systems with automated manufacturing processes.
In: CFK-Valley Stade Convention, pp. 50-55, 2014

Schröder, A.-K.; Nebl, T.; Mainzinger, C.:
Theoretical foundations of efficiently organising production processes: using the example of combining organisational forms of component manufacture and internal transport.
In: Journal of Industrial Engineering, Hindawi Publishing Corporation, pp. 1-27, 2014

Wanner, M.-C.; Glienke, R.; Busch, M.:
Preloaded hybrid connections with lock bolts and blind rivet studs.
In: Conference report T 39 – Joint research within mechanical joint technologies - 4. Joint colloquy of jointing technologies 2014, EFB Hanover 2014, pp. 41-50, ISBN 978-3-86776-448-3

Wanner, M.-C.; Glück, N.; Schumann, M.:
Joining of large structures. Mixed building as a chance within adherence technologies.
In: Adherence 'KLEBEN & DICHTEN' (7),Springer press, Wiesbaden, ISSN 1619-1919, pp. 16-20, 2014

Wanner, M.-C.; Glück, N.:
Adherence of large structures.
In: 14. Adherence technology colloquy – Joint research within adherence technology-Conference report, Frankfurt on the Main, Dechema, pp. 4-6, 2014

Wanner, M.-C.; Kothe, U.; Eggert, M.:
Action plan for restructuring the technology of a medium-sized shipyard.
In: Ship Science & Technology (7), Cartagena, COTECMAR, pp. 77-90, 2014

Weidemann B.; Sender, J.:
Productivity index of space planning in plants.
An approach to index based capacity planning of plant ressources using the example of ship industry.
In: Journal of economic plant running ZFW (3), Munich, Carl Hanser press, pp.113-116, 2014

Ehrich, K.:
Custom Made Composite Supports for LNG Cargo Systems.
In: Proceedings of the Polar 2013, IRB-Verlag, pp 99-110

Fechner, M.; Gronwald, P.; Schumann, M.:
Increase in load bearing capacity of orthotropic decks through fibre-reinforced inliners.
In: Proceedings of the TechnoBond, industrial gluing technology symposium 2013, Memmingen, pp 331-332

Geist, M.; Grewe, O.:
Application-related TLS testing.
In: Contributions of the Oldenburger 3D-Tage 2013, pp 10-19

Geist, M.; Grewe, O.; Knaack, L.:
Application-related TSL testing and investigation of contour accuracy of phase comparison scanners.
In: Allgemeine Vermessungs-Nachrichten (2013)7, pp 243-251

Geist, M.; Knaack, L.:
Investigation of low-cost digitization systems for industrial applications.
In: Proceedings of the Go-3D "Computergraphik für die Praxis" 2013, pp 143-155

Gericke, A.:
Cost-effective process variant of submerged-arc welding in transverse position on large plate thicknesses for application on offshore structures and in shipbuilding
In: DVS reports volume 296, Große Schweißtechnische Tagung, Essen, DVS-Verlag, 2013, pp 1229-1234, ISBN 978-3-87155-614-2

Grewe, O.:
Use of laser scanners in construction of structural steelwork.
In: Schiff & Hafen 65(2013)3, pp 41-42

Harmel, A.:
Automatic clearing up and separating of components in cut sheet.
In: Schweißen und Schneiden 65(2013)6, pp 339-341

Henkel, K.-M.; Peters, R.; Gericke, A.; Sumpf, A.; Plenaitis, S.:
Development of a cost-effective process variant of submerged-arc welding in transverse position on large plate thicknesses for application on offshore structures and in shipbuilding.
In: DVS reports volume 296, Große Schweißtechnische Tagung, Essen, DVS-Verlag, 2013, pp 1-7, ISBN 978-3-87155-614-2

Sender, J.; Wanner, M.-C.:
Design of Production Systems for Large Maritime Structures.
In: 5th CARV 2013, Munich, 2013, pp 437-442

Sender, J.; Wanner, M.-C.:
Integrated capacity and layout planning.
In: ZWF, 108(2013)3, pp 2-5

Stranghöner, N.; Schiborr, M.; Glienke, R.; Wanner, M.-C.; Ulbrich, D.:
Non-slip joints in compliance with Eurocode 3 and DIN EN 1090-2.
In: Stahlbau 82(2013)10, pp 750-761

Ulbrich, D.; Primke-Engel, R.; Blunk, C.; Glienke, R.:
Mechanical joints in light metal structures.
In: Stahlbau 82(2013)11, pp 805-818

Wanner, M.-C.; Blunk, C.:
Experimental determination of the fatigue strength of shear-stressed lock bolt and blind rivet joints without component influence.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 79-84, ISBN 978-3-86776-415-5

Wanner, M.-C.; Fuchs, N.:
Requirements and options for the self-piercing riveting of aluminium wrought alloy in aircraft structure assembly.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 25-32, ISBN 978-3-86776-415-5

Wanner, M.-C.; Grewe, O.; Petkov, V.:
Surface capturing and automatic evaluation of CFK propeller structures.
In: Articles for the Oldenburger 3D-Tage 2013, pp 148-155

Wanner, M.-C.; Nehls, T.:
Numerical and experimental examinations of blind rivet-screw-systems.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 103-108, ISBN 978-3-86776-415-5

Wanner, M.-C.; Nehls, T.:
Simulation-based design of function elements.
In: UTFscience, 2013/IV, pp 1-8

Blunk, C.; Wanner, M.-C.:
Stress-based dimensioning of blind rivet seams with experimentally determined indicators
In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 103-107

Denkert, C.; Wanner, M.-C.:
Structural behaviour of prestressed mechanical joining fastenings in structural components made of composite fibre plastics In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 47-50

Glienke, R.; Wanner, M.-C.:
Dimensioning concept for lock bolt joints in steel and aluminium structures. In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 93-97

Grewe, O.; Geist, M:
Laser scanning as a tool for the filling of megayachts. In: Photogrammetry Laser Scanning Optical 3D Measurement Technology, Articles for the Oldenburger 3D-Tage 2012, T. Luhmann/C. Müller (publ.), pp. 63-69

Grewe, O.; Petkov, V.; Wanner, M.-C.:
Evaluation process and measurement conceptions for the geometric testing of CRP propeller structures In: Proceedings of the Go-3D2012 Conference, Fraunhofer-Verlag, 2012, pp. 17-30

Grewe, O.; Wanner, M.-C.:
Automatic surface capturing of CFK propellers. In: 8th International Conference on High Performance Marine Vehicles, 27.-28.09.2012, pp. 238-246

Henkel, K.-M.; Goldmann, F.; Gericke, A.; Hein, R.; Hinz, T.:
Improving ductility with alternating current during submerged-arc welding of S 690 QL 1 fine-grain steel for offshore applications. In: DVS Reports Volume 286, Große Schweißtechnische Tagung, Düsseldorf, DVS-Verlag, 2012, pp. 119-124

Henkel, K.-M.; Kutz, K.-H.; Banaschik, R.:
Investigations of the basic microstructure and dynamically loaded spheroidal graphite cast iron microstructures of real components In: Sonderbände der praktischen Metallographie 44, publ.: G. Petzow, 2012, pp. 211-216, ISBN 978-3-88355-392-4

Sender, J.; Wanner, M.-C.:
Integrated capacity and layout planning – Factory planning for large structure with tools from the digital factory. In: ZWF 108(2013)3, pp. 109-112

Sender, J.; Wanner, M.-C.; Weidemann, B.:
Type representatives for maritime large structures. In: Productivity Management 18(2013)1, pp. 57-60

Wanner, M.-C.; Ebert, A.; Strohbach, T.; Blunk, C.; Fuchs, N.:
Solid rivets can optimise aircraft final assembly. In: Ingenieurspiegel 2012/3, pp. 32-34

Wanner, M.-C.; Glienke, Ralf:
Status of R&D for thicker plates taking the example of wind energy In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 33-40

Wanner, M.-C.; Sender, J.:
Simulation-based planning of panel lines. In: ZWF 107 (2012) 3, pp. 178-181

Wanner, M.-C.; Sender, J.; Herzig, O.:
Lean intralogistics for undirected material streams. In: Productivity Management 17 (2012) 3, pp. 47-50

Büchler, D.; Elsken, T.; Glück, N.; Sier, M.; Bludzuweit. S.:
Ultralight space cell – Development of ultralight large structures of fibre composite and hybrid construction for the shipbuilding sector In: Proceedings of the Status Day Shipping and Ocean Technology, 2011, pp. 25-45, ISBN 978-3-89336-745-0

Grewe, O.:
Computer-aided computation and analysis of yacht surfaces. In: Proceedings of the Go-3D Conference 2011, pp. 125-135, ISBN 978-3-8396-0275-1

Grewe, O.; Hoffmann, U.; Wanner, M.-C.:
Assessment of the surface finish of megayachts  In: Yearbook of the Shipbuilding Association, 104th Volume, 1010, pp. 308-318, ISBN 978-3-87700-129-5

Irmer, M.; Sendker, N.; Heinrich, S.:
Film vs. paint – Changing of the guard in shipbuilding corrosion protection. In: Ingenieurspiegel (2011)2, pp. 62-63

Kröger, H.; Bludzuweit, S.; Fröhlingsdorf, W.; Grewe, O.; Bartke, S.; Kliewe, C.:
CFK Prop 6 m – Development of design, simulation and testing methods for 3D reinforced CFRP propeller structures up to 6 m diameter  In: Proceedings of the Status Day Shipping and Ocean Technology, 2011, pp. 75-90, ISBN 978-3-89336-745-0

Wanner, M.-C.; Glienke, R.:
Use of maintenance-free mechanical joints in steel structures.  In: DVS Report Volume 275, Lareg Welding Engineering Conference, 2011, pp. 356-365, ISBN 978-3-87155-267-0

Wanner, M.-C.; Glienke, R.; Blunk, C.:
Development of hybrid joints in metal materials with respect to load-bearing strength and leak-tightness. In: UTFScience, 2011/III, pp. 1-29

Wanner, M.-C.; Henkel, K.-M.; Anders, M.; Hein, R.:
Enhancement of joining quality of galvanized machine structures by MIG soldering  In: DVS Report Volume 275, Large Welding Engineering Conference, 2011, pp. 390-394, ISBN 978-3-87155-267-0

Wanner, M.-C.; Henkel, K.-M.; Blunk, C.; Glienke, R.:
Development of hybrid joints in metal materials with respect to load-bearing strength and leak-tightness.  In: High-strength and hybrid materials, Conference proceedings T32,  EFB Hanover, 2011, pp. 445-484, ISBN 978-3-86776-363-9

Wanner, M.-C.; Henkel, K.-M.; Hein, R.; Dörge, A.; Bockelmann, M.:
Increasing the deposition rate during submerged-arc welding of water-quenched high-strength fine-grain structural steels for offshort applications.  In: DVS Report Volume 277, Welding in Shipbuilding and Engineering, 2011, pp. 7-12, ISBN 978-3-87155-269-4

Wanner, M.-C.; Henkel, K.-M.; Hein, R.; Anders, M.:
Investigations into automated robot-guided edge machining of shipbuilding steel using plasma methods.  In: DVS Report Volume 279, Robots – Cost-effective production thanks to joining automation, 2011, pp. 72-78, ISBN 978-3-87155-271-7

Wanner, M.-C.; Sender, J.:
Efficient use of material flow simulation in shipyard planning. In: Productivity Management 16(2011)1,  pp. 30-32

Zych, A.; Wanner, M.-C.:
Automatic sensor-based robot programming.  In: DVS Report Volume 279, Robots – Cost-effective production thanks to joining automation, 2011, pp. 79-85, ISBN 978-3-87155-271-7

Fuchs, N.; Wanner, M.-C.; Henkel, K.-M.:
Alternative joining procedures in outfitting processes. 
In: Schiffbauforschung  49(2010)1, p. 66-78, ISBN 978-3-87155-584-8

Fuchs, N.; Wanner, M.-C.; Henkel, K.-M.:
Alternative joining procedures in outfitting processes.
In: Hansa 147(2010)9, p. 59-64

Grewe, O.; Geist, M.:
Use of terrestrial laser scanners for engineering processes in shipbuilding.
In: Proceedings of Conference Go-3D 2010, S. 39-54
ISBN 978-3-8396-0164-8

Hurtienne, M.; Kahnfeld, A.; Henkel, K.-M.:
Production and welding assembly of the steel panel façade of the Ozeaneum in Stralsund
In: DVS Report, Volume 267, 2010, page 140-147, ISBN 978-3-87155-592-3

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.:
Quality assurance of blind rivet and lock bolt connections by riveting process monitoring and non-destructive clamping force determination.
In: Conference Proceedings T 31, EFB Hanover, 2010, p. 105-122

Wanner, M.-C.; Sender, J. ; Kothe, U.; Bohnenberg, R.:
Long term capacity planning in the shipbuilding industry.
In: Proceedings for 43rd CIRP International Conference, Vienna,2010, S. 909-916
ISBN 978-3-7083-0686-5

Bohnenberg, R.; Wanner, M.-C.; Grewe, O.; Sender, J.:
Application of 3-D Computer Graphics for Reorganizing Shipyards.
In: Go-3D 2009 “Go for Innovations”. Proceeding of the Conference Go-3D on August 31, 2009 in Rostock. Rostock: Fraunhofer IGD, p. 7-21, ISBN 978-3-8396-0044-3

Dörge, A.; Henkel, K.-M.; Wanner, M.-C.:
Examinations of the Increase of the Assembly Speed of Large Sections in Shipbuilding by Electro Gas Welding.
In: Die Verbindungsspezialisten 2009. DVS-Berichte Band 258, Düsseldorf: DVS-Verlag, 2009, p. 163-166, ISBN 978-3-87155-584-8

Kothe, U.:
Process Capability Factors in the Production of Curved Panels
WMTC World Maritime Technology Conference & Exhibition 2009 Technical Paper Presentation – Session 2A, Paper No. 1, Mumbai, 17 p. (CD)

Wanner, M.-C.:
“Pro-Dock”-Enhancement of Production Capacities by Means of a Reduction of Dock Lay Times and Preceeding Processes.
In: BMWI-Statustagung Schifffahrt und Meerestechnik, 2009, P. 111-118

Wanner, M.-C.:
Improved Productivity in the Production of Naval Vessels.
In: 50 Jahre produktionswissenschaftliche Forschung und Lehre, Munich: Oldenbourg Verlag, 2009, p. 449-462, ISBN 978-3-486-59072-2

Wanner, M.-C.:
Ships.
In: H. J. Bullinger (Editor) – Technology Guide: Principles-Applications-Trends, Berlin: Springer-Verlag, 2009, P. 300-303

Wanner, M.-C; Czarnietzki, R.:
Examination of Selected Production Sequences in Panel and Unit Manufacturing on a Compact Shipyard.
In: EPP 14(2009)1, p. 44-48

Wanner, M.-C.; Henkel, K.-M.; Herzog, P.; Fuchs, N.; Glienke, R.:
Application of Blind-Riveted Functional Elements in Selected Component Materials.
In: UTFScience, IV/2009, p. 1-15

Anders, M.; Henkel, K.-M.; Wanner, M.-C.:
Survey for Edge Preparation on Shipbuilding Steel by Means of Plasma Processes

Die Verbindungsspezialisten 2008, DVS reports, volume 250, Düsseldorf: DVS-Verlag, 2008, pp. 384-390, ISBN 978-3-87155-256-4

Fuchs, N.; Henkel, K.-M.; Wanner, M.-C.:
Alternative Assembly Methods for the Equipment in  Shipbuilding Finishing

Die Verbindungsspezialisten 2008, DVS reports, volume 250, Düsseldorf: DVS-Verlag, 2008, pp. 446-448, ISBN 978-3-87155-256-4

Wanner, M.-C.; Kothe, U.:
Shipbuilding Engineering at the University of Rostock
In: Ingenieurspiegel Mai 2008, pp. 56-57

Wanner, M.-C.; Bohnenberg, R.; Weidemann, B.; Zych.:
Production-Oriented Approaches for the Increase of  the Production in Shipyards

In: Hansa 145(2008)8, pp. 56-59

Wanner, M.-C.; Zych, A.; Pfletscher, U.:
Automatic Robot Programming System for Welding Robots in Micro-Panel Production

In: Schiffbauforschung 47(2008)1, pp. 39-4

Wanner, M.-C.; Bohnenberg, R.; Czarnietzki, R.:
Simulating the Flow of Material in Maritime Industries
In: LandesTechnologieAnzeiger 13(2008)3, p. 19

Wanner, M.-C.; Pfletscher, U.; Zych, A.:
Developing Relief Models with Industrial Robots
In: LandesTechnologieAnzeiger 13(2008)4, pp. 8-9

Weidemann, B.; Wanner, M.-C.:
Development Trends on Productivity Increase in Shipbuilding and in the Maritime Supply Industry

In: Hansa 145(2008)9, p. 112-116

Wanner, M.-C.:
The Robot Welds What It Sees. High Productivity in Shipbuilding by Applying Modern Technologie

In: Traditio et Innovatio, Forschungsmagazin der Universität Rostock 13(2008)2, pp. 29-30

Weidemann, B.; Bohnenberg, R.; Wanner, M.-C.:
Shipyard Investment Planning by Use of Modern Process-Simulation and Layout-Planning Tools

7th International Conference on Computer and IT Applications in the Maritime Industries COMPIT ‘08, Liège, 21.-23.04.2008, pp. 350-363,  ISBN 10 2-9600785-0-0, ISBN 13 978-2-9600785-0-3

Wanner, M.-C.; Henkel, K.-M ; Delin, M.:
Density and Bearing Capacity in Material and Coat Variation of Retaining Ring Bolts and Blind Rivet Joints
In: Tagungsband zum EFB-Kolloquium T 27, Hannover: Druckteam GmbH, 2007, p. 127-137, ISBN 978-3-86776-221-2

Wanner, M.-C.; Füssel, U.; Henkel, K.-M.; Delin, M.; Liebrecht, F.; Six, S.:
Sealing Systems for Mechanical Joining Systems with Prepunch Hole Operation.
In: EFB-Forschungsbericht Nr. 261, Hannover, 2007,ISBN 978-3-86776-222-9

Wanner, M.-C.; Kunkel, J.:
Accuracy Control for the Final Finish of Mega-Yachts.
In: Schiffbauforschung 46(2007)1, p. 64-73

Wanner, M.-C.:
Applied Quality Inspection for Material and Interconnect Testing.
In: VDI-/VDE Zeitschrift Mensch und Technik, 2007/III, p. 10-11

Weidemann, B.; Wanner, M.-C.:
Web-based Project and Document Management.
In: Landestechnologieanzeiger 2007/2, p. 8-9

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.:
Alternative Joining Technologies in the Final Assembly of Equipment Components in Shipbuilding Technology.
In: Hansa 144(2007)11, p. 53-57

Wanner, M.-C.; Delin, M.:
Evaluation of Load-bearing Characteristics of Mechanically Joined Connections.
UTFSience, 2007/IV, p. 1-6

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.; Delin, M.:
Tightness and Mechanical Strength of Lock Bolts and Blind Rivet Joints in Depending on Different Materials and Surface Coatings.
In: BLECHbusiness 2007 Conference “Technologies to Maximise Productivity in Sheet Metal Working”, Proceedings T28, 2007, p. 35-47
ISBN 978-3-86776-302-8

Gosewehr, W.; Läritz, C.; Noth, A.:
Articulated arm handels pressure die-casting parts.
In: Kunststoff-Magazin (2006)4, p. 36-37

Grothkopp, B.; Felkel, F.; Kunkel, J.; Schneidenbach, R.; Wanner, M.-C.:
Determination of manufacturing precision and derivation of quality-increasing measures in ship hull construction.
In: Hansa 143(2006)9, p. 131-134

Peter, S.:
Analysing the influences of selected parameters on the duration of loading and unloading of a RoRo ferry.
In: Jahrbuch der Schiffbautechnischen Gesellschaft, Berlin: Springer-Verlag, Vol. 99, 2005, p. 395- 399

Wanner, M.-C.:
Digital shipyard. 
In: Wissensmeer. Das Journal für die Wissenschaftsgemeinschaft Region Rostock, Nov. 2006, edition 5, p. 29

Wanner, M.-C.; Wurst, O.:
Sensor system for weight management in ship construction. 
In:LandesTechnologieAnzeiger, 2006/1, p. 14-15

Wanner, M.-C.; Czarnietzki, R.:
Simulation-supported manufacturing control station for the production of cooling systems. 
In: PPS-Management 11(2006)2, p. 43-46

Wanner, M.-C.; Henkel, K.-M.; Schneidenbach, R.:
Tailored joining methods for hybrid constructions from GRP and metal in large scale production of yachts.
In: Schiffbauforschung 45(2006)1, S. 104-115

Wanner, M.-C.; Czarnietzki, R.:
Interactive planning of maritime production facilities. 
In: LandesTechnologieAnzeiger, 2006/3, p. 5

Wanner, M.-C.; Henkel, K.-M.; Herzog, P.; Delin, M.:
Influence of component coating on the load-carrying capacity of retaining ring bolt connections.
In: UTFScience, 2006/III, p. 1-8

Wanner, M.-C.; Füssel, U.; Delin, M.; Henkel, K.-M.; Six, S.; Liebrecht, F.:
Tightness of mechanically joined blind rivet and retaining ring bolt connections. 
In: UTFScience, 2006/IV, p. 1-7

Wanner, M.-C.; Delin, M.; Henkel, K.-M.;
Designing retaining ring bolt connections. Evaluating shear-based stiffness analyses.
In: wt Werkstattstechnik online 96(2006)11/12, p. 879-883

Wanner, M.-C.; Henkel, K.-M.:
Joining technologies for new materials.
In: LandesTechnologieAnzeiger, 2006/4, p. 18

Weidemann, B.; Wanner, M.-C.:
Reducing costs, keeping the appointed time and improving the quality. Web-based project management for collaboration of suppliers. 
In: Hansa 143(2006)12, p. 33-35

Aeffner, K.; Papendieck, K.-H.; Klehn, B.; Wanner, M.-C.; Weidemann, B.:
Development of a propulsion string in MariCoNet.
In: Hansa 142(2005)1, p. 45-48

Czarnietzki, R.; Lüsch, S.; Wanner, M.-C.; Wenzel, H.:
Simulation of loading and unloading processes in RoRo ferries.
In: Hansa 142(2005)4, p. 32-37

Wanner, M.-C.; Czarnietzki, R.; Zych, A.:
New interactive tools for the production planning and control in ship production. 
In: PPS Management 10(2005)4, p. 28-31

Wanner, M.-C.; Henkel, K.-M.; Alraheb, O.:
Simulation of the setting process and the shearing stress applicable to retaining ring bolt connections. 
In: Konstruktion 57(2005)1/2, p. 71-75

Wanner, M.-C.; Henkel, K.-M ; Becker, B.; Thoms, V.; Bräunling, S.:
Using  high-power ultra sound to reduce transformation forces in clinching.
In: wt Werkstattstechnik online 95(2005)10, p. 803-808

Wanner, M.-C.; Henkel, K.-M.; Becker, B.; Thoms, V.; Timm, M.:
Clinching steel and aluminium materials under the influence of high-power ultra sound. 
In: UTFscience 2005/I, p. 1-4

Wanner, M.-C.; Kothe, U.:
Application of the Six-Sigma strategy for the production of ship sections.
In: Hansa 142(2005)9, p. 70-73

Wanner, M.-C.; Kothe, U.:
Application of SPC instruments in the production of curved panels.
In: Schiffbauforschung 44(2005)1, p. 80-96

Wanner, M.-C.; Kothe, U.:
Precision production of curved shipbuilding structures.
In: LandesTechnologieAnzeiger 3/2005. p. 6

Wanner, M.-C.; Weidemann, B.:
Development of the maritime supply industry in enterprise networks. 
In: LandesTechnologieAnzeiger 3/2005, p. 5

Weidemann, B.:
Make-or-buy decisions in engineering.
Jahrbuch der Schiffbautechnischen Gesellschaft, Berlin: Springer-Verl., 98. Band 2004, 2005, p. 143-147

Czarnietzki, R.; Felkel, F.; Frick, C.; Gerschau, H.P.; Heller, T.; Wanner, M.-C.; Zych, A.:
Development of new interactive tools for planning the surface density and resources for a continuous construction schedule: 4D-surface density planning.
In: Hansa 141(2004)7, p. 27-29

Nolde, P.; Meyer, B.; Sarhil, Y.:
Cold crack formation in high-strength welding products and its avoidance.
In: Schiffbauforschung 42(2003)4, p. 3-10

Thoms, V.; Six, S.; Wanner, M.-C.; Herzog, P.; Henkel, K.-H.; Al-Raheb, O.:
Designing retaining ring bolt connections in mixed material constructions under thermal load.
In: UTF science III/2004, p. 1-7

Wanner, M.-C.; Kunkel, J.:
3-D laser scanner: Measuring large structures in ship construction.
In: Landestechnologieanzeiger 3/2004, p. 14-15

Wanner, M.-C.; Henkel, K.-M.:
Static/dynamic strength, rigidity and corrosion: Testing connections and material.
In: Landestechnologieanzeiger 4/2004, p. 12

Wanner, M.-C.; Henkel, K.-M.; Al Raheb, O.:
FE simulation of thermal load on retaining ring bolt connections in mixed steel-aluminium constructions.
In: wt Werkstattstechnik online, 94(2004)10, p. 562-565

Wanner, M.-C.; Henkel, K.-M.; Al Raheb, O.:
Simulation of thermal load on retaining ring bolt connections in mixed steel-aluminium constructions.
In: Tagungsband 11. Paderborner Symposium Fügetechnik, Mechanisches Fügen und Kleben, ISBN 3-9809524-1-X, 2004, p. 124-134

Wanner, M.-C.; Kunkel, J.; Felkel, F.:
High-precision measuring of evenness.
In: Hansa 141(2004)10, p. 17-19

Wanner, M.-C.; Kothe, U.; Schneidenbach, R.; Kunkel, J.; Pfletscher, U.:
Accurate construction of bi-axial curved surfaces and volume building elements of steel (curved panel) – continued. .
In: Final report A 169/S24/10018/01(AVIF), Dezember 2004

Wurst, Schubert, B.; Wanner, M.-C.:
Mobile determination of weight and gravitation centres of large structures.
In: wt Werkstattstechnik online 94(2004)5, p. 226-230

Wanner, M.-C.; Wurst, O.:
Mobile measuring system for large structures.
In: IEEE-Conference on Mechatronics & Robotics, Conference Proceedings, September 2004, Aachen, ISBN 3-938153-50-X, 2004, Page 1552-1556

Wanner, M.-C.; Wurst, O.:
Weight management in ship construction.
In: Schiffbauforschung 43(2004)2, p. 51-58

Czarnietzki, R.; Heller, T.:
Application and use of a simulation-supported production station for sheet processing.
VZB / EFB Conference proceedings: Optimimisation of production flows in sheet processing. ISBN 80-239-1768-4, 2003, Prague

Czarnietzki, R.; Heller, T.:
Simulation-supported system for planning, contract management and control of sheet processing.
EFB- Conference proceedings T23: Optimization of production flows in sheet processing. 3/2003, Fellbach near Stuttgart

Czarnietzki, R.; Heller, T.:
Simulation-supported tool for planning and managing SMEs. Fraunhofer Anwendungszentrum Großstrukturen in der Produktionstechnik,
Rostock, 2003, Final report on the research commissioned by the Ministry for Trade and Industry of Mecklenburg- Lower Pomerania Az.: V430-630.5-430

Meyer, B.; Nolde, P.; Diers, G.; Sarhil, Y.; Rosert, R.:
Developing new and optimising existing MSG filling wires for the welding of high-strength fine-grained steels.
DVS reports, volume 225, p. 443 – 451

Neumann, M.; Wanner, M.C.; Weidemann, B.:
Maritime cooperation network (MariCoNet).
Hansa, 120. year’s issues 2003, No.10, S. 68 – 69

Neumann, M.; Wanner, M.C.; Weidemann, B.:
Internet based co-operation between supplier and shipyards in the maritime co-operation network,
COMPIT - conference proceedings, Hamburg 14. – 17.05.2003, p. 297 – 307

Thoms, V.; Wanner, M.C.; Six, S.; Herzog, P.; Al-Raheb, O.; Henkel, K.-M.:
Designing retaining ring bolt connections in mixed material constructions under thermal load,
Joint project of TU Dresden, Institute for Production Engineering and University of Rostock, Institute for Production Engineering and Logistics, 2003 – Research report No. 217

Wanner, M.C.; Al Raheb,0; Henkel, K.M.:
Determining strength properties of retaining ring bolt connections,
wt Werkstatttechnik online, year’s issue 93 (2003), volume 10, p. 719 – 722

Wanner, M. C.; Kothe, U.; Nikolay, P.; Schneidenbach, R.:
Designing mobile welding data recording in ship construction,
Conference proceedings, 4th special conference welding in ship production and engineering production, p. 118 – 130

Wanner, M.C.; Kunkel, J.; Pfletscher, U.:
3-D measuring of large structures
Schiffbauforschung 42, year’s issue (2003), No. 3, p. 9 – 108

Czarnietzki, R.; Heller, T.:
Simulation supported planning, order management and control system for steel construction.
16th Symposium of simulation technology ASIM 2002, 10 September 2003, p. 131-137

Czarnietzki, R.; Heller, T.:
Simulation-supported control station with integrated process model generation for steel construction enterprises.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 - research report on the research project commissioned by AiF “Otto von Guericke“ e.V., Berlin, funding no. KF 00499901

Czarnietzki, R.; Neumann, M.; Palm, D.; Pfletscher, U.:
Attractive problem solutions in shipbuilding from Rostock,
Interaktiv – magazine of Fraunhofer IPA 3/02 (2002), p. 3 und p. 6-8

Mc-Pherson, M.; Wanner, M.C.:
Tecnica de Manufactura-Separata Elaboración de materiales por desprendimiento de particulas con medios mecánicos,
Joint publication of Oriente University / Cuba and Rostock University Germany, 2002

Wanner, M.C.; Kunkel, J.:
Three-dimensional measuring and automated sample comparison of large structures in production engineering.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 – - research report on the research project ordered by Kultusministeriums M-V (TEAM), funding no. 9801090

Wanner, M.C.; Koethe, U; Nikolay, P.; Schneidenbach, R.; Wiebeck, E.:
Basics of precision production of fore and aft complex sections on ships.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 - research report on the research project commissioned by BMBF Schifffahrt und Meerestechnik, funding no. 18S01909

Wanner, M.C.; Neumann, M.:
Measures for the extension of work and jobs in innovation growth cores of industry in the town and region of Wolgast.
Final report, parts I and II, August 2002

Wenzel, H.J.; Czarnietzki, R.; Wurzler, B.:
Designing interdisciplinary engineering processes with high time parallelity for the construction of specialized ships.
Aker–MTW Werft GmbH Wismar, 2002 – research report on the research project commissioned by BMBF Schifffahrt und Meerestechnik, funding no. 18S0181

Zorn, H; Henkel, K.-M.; Herzog, P.:
Stability properties of retaining ring bolt connections, Sheet irons, pipes, profiles
UTF Science, Meisenberg Verlag, 50 (2002), 1, p. 15-19

Magazine Articles, Proceedings 2015

Banaschik, R.; Herholz, H.; Henkel, K.-M.:
Filler wire electrodes for electro-gas welding in the European economic area - current state of development
In: Schweißen und Schneiden 67(2015)5, pp 245-249

Blunk, C.; Glienke, R.; Wanner, M.-C.:
Reducing costs, increasing efficiency
In: DVS reports vol. 315, pp 789-794, 2015, ISBN 978-3-945023-46-4

Denkert, C.; Süße, D.:
Using the F-element for the correct bolted joint
In: proceedings: 16. Round Table “Simulating Manufacturing”, 16 p, 2015, ISBN 978-3981381443

Denkert, C.; Wanner, M.-C.; Glienke, R.; Busch, M.:
Hybrid joints - using preloading and bonding intelligently
In: Proceedings TechnoBond, 2nd Industrial Gluing Technology symposium, pp 144-148, 2015

Fröck, L.:
Joining of pipework by bonding in shipbuilding
In: Ingenieur-Spiegel (2015)2, pp 71-72

Fröck, L.; Glück, N.; Nagel, C.:
Joining of metal pipes in shipbuilding by bonding (part 1)
In: adhäsion 59(2015)10, pp 42-47

Fröck, L.; Nagel, C.:
Joining of pipework by bonding in shipbuilding
In: DVS reports vol. 315, pp 149-152, 2015, ISBN 978-3-945023-46-4

Fröck, L.; Nagel, C.; Brede, M.; Glück, N.:
Dimensioning on the basis of analytical methods

In: adhäsion 59(2015)12, pp 38.43

Fröck, L.; Nagel, C.; Brede, M.; Glück, N.:
Determination and validation of indicators

In: adhäsion 59(2015)11, pp 36-41

Fröck, L.; Wanner, M.-C.:
Joining of pipework by bonding in shipbuilding

In: Proceedings TechnoBond, 2nd Industrial Gluing Technology symposium, pp 162-165, 2015

Fuchs, N.; Wanner, M.-C.:
Recording and evaluation of the tension state of bolted connections by acoustic resonance analysis

In: TM – Technisches Messen 82(2015)10, pp 526-535

Geist, M.; Meister, M.; Knaack, L.; Gierschner, F.:
Local modelling for the determination of surface shape discrepancies using a terrestrial laser scanner

In: Photogrammetry-laser scanning-optical 3D measuring technology. Contributions of the Oldenburger 3D days, pp 2-13, 2015, ISBN 978-3879075539

Gericke, A.; Banaschik, R.; Henkel, K.-M.:
Increase in toughness through melt bath vibration of submerged arc-welded fine-grain construction steels

In: Proceedings DVS reports 315, pp 695-700, 2015

Gierschner, F.; Geist, M.; Knaack,L.; Meister, M.:
Partially automated quality control in construction of structural steelwork using laser scanners

In: Proceedings Go-3D Computer graphics in practice, pp 129-140, 2015

Glienke, R.; Blunk, C.; Denkert, C.; Wanner, M.-C.:
Dimensioning and execution of joints with lockbolts in structural steelwork

In: Stahlbau 84(2015)12, pp 980-997

Glienke, R.; Ebert, A.; Wanner, M.-C.:
Requirements for mechanical joining technology for wind turbine towers using structural steelwork and with large hub heights

In: Stahlbau 84(2015)8, pp 556-570

Glück, N.:
High-frequency testing of FRP accelerates component testing

In: Materialkompass (2015)1, p. 11

Glück, N.:
Optimisation of the application of force in trusses made of composites

In: Proceedings German aerospace congress, 10 p., 2015

Glück, N.; Schumann, M.:
Development of 3D strand laying technology for ultra-lightweight large-scale structures for marine structure

Proceedings International Conference on Lightweight Design of Marine Structures (LIMAS), pp 151-156, 2015

Grenzdörffer, G. J.; Naumann, M.; Niemeyer, F.; Frank, A.:
Symbiosis of UAS Photogrammetry and TLS for Surveying and 3D Modeling of Cultural Heritage Monuments - a Case Study about the Cathedral of St. Nicholas in the City of Greifswald

In: The International Archives Photogrammetry Remote Sensing Spatial Information Sciences, XL-1/W4, pp 91–96 DOI: 10.5194/isprsarchives-XL-1-W4-91-2015

Hauer, M.; Gärtner, F.:
Innovative rudder coatings through cold gas spraying processes

In: Schiff & Hafen 67(2015)12, pp 44-45

Herholz, H.; Dryba, S.; Gründler, M.; Wanner, M.-C.:
Application of small robots in GMA welding of large tubular nodes

In: Proceedings DVS reports vol. 317, pp 76-80, 2015

Knaack, L.: Geist, M.; Gierschner, F.; Meister, M.:
Use of laser scanners in construction of structural steelwork

In: Schiff & Hafen 67(2015)8, pp 36-39

Meißner, J.-P.; Schulz, J.-P.; König, A.; Fleßner, H.:
New team in simulation - robots and optical sensors

In: ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb (2015)3, pp 94-97

Meißner, J.; Sender, J.; Weidemann, B.; Wanner, M.-C.:
Simulation Environment for the Integration of 3D-Sensors into Automated Maritime Production Facilities

In: Proceedings 14th International Conference on Computer and IT Applications in the Maritime Industries, Ulrichshusen, 11-13 May 2015, pp 556-562

Nehls, T.; Wanner, M.-C.; Landgrebe, D.; Kropp, T.:
Numerical and experimental investigation of settling process irregularities with lockbolt systems

In: Proceedings Joint research in mechanical joining technology, pp 51-57, 2015

Staschko, R.; Fuchs, N.; Glück, N.:
Damage in the semi-hollow punch riveting process in hybrid FRP joints

In: Joining Plastics – Fügen von Kunststoffen 9(2015)3-4, pp 204-211

Stranghöner, N.; Afzali, N.; Berg, J.; Schiborr, M.; Bijlaard, F.; Gresnigt, N.; De Fries, P.; Glienke, R.; Ebert, A.:
Influence of different testing criteria on the slip factor of slip-resistant connections

In: Conference Paper 13th Nordic Steel Construction Conference, Tampere, Finnland, 23.-25.09.2015

Wanner, M.-C.; Glück, N.; Schumann, M.; Schornstein, B.:
Truss-type lightweight structures made of FRP

In: wt Werkstattstechnik 105(2015)9, pp 580-585

Magazine Articles, Proceedings 2014

Banaschik, R.; Herholz, H.; Henkel, K.-M.:
Metallurgical impact on welding results of electrogas-welded butt joints via cold wire lead.
In: DVS Congress 2014, Big Welding Technology Conference (DVS-reports vol. 306), Düsseldorf, DVS Media GmbH, ISBN 978-3-945023-03-7, pp. 268-274, 2014

Denkert, C.; Süße, D.:
Load limit of function element screw joints.
In: Conference report vol. 4. Joint colloquy of joint technologies 2014 'Joint research on mechanical joint technologies', Conference report T39, EFB Hanover, pp. 83-89, 2014

Denkert, C.; Süße, D.:
Sheet metal thread racks − From insertion to failure.
In: Conference report vol. 15. Roundtable "Simulating Manufacturing", Marburg, Simufact Engineering, ISBN 978-3-981381-43-6, pp. 1-10, 2014

Ebert, A.; Glienke, R.; Wanner, M.-C.:
Recent requirements on mechanical jointing within steel and lightweight metal construction for solar and wind energy plants.
In: DVS Congress 2014, Big Welding Technology Conference (DVS-reports vol. 306), Düsseldorf, DVS Media GmbH, ISBN 978-3-945023-03-7, pp. 210-220, 2014

Glienke, R.; Blunk, C.:
Change within connection technology.
The lock bolt within steel construction. In: German Engineer Journal (July-August), Hanover, Schiele and Schön, pp. 12-19, 2014

Glienke, R.; Stranghöner, N.; Schiborr, M.:
Procedure test of slip-resistant connections according to EN 1090-2.
Contribution to EUROSTEEL 2014, 7th European Conference on Steel and Composite Structures, Napoli, pp. 12-19, 2014

Grewe, O.; Geist, M.:
Reverse engineering of ship structures.
In: HANSA International Maritime Journal (5), pp. 30-34, 2014

Irmer, M.; Momber, A.; Glück, N.:
Evaluation of organic surface protection systems in arctic offshore use.
In: Conference report of conference n. 13: Corrosion prevention within ship techonologies, Hamburg, DNV GL, GfKORR- Society of corrosion prevention, Society for shipbuilding technologies, ISBN 978-3-935406-53-6, pp. 5-20, 2014

Irmer, M.; Momber, A.; Glück, N.:
Coating systems: properties amidst arctic conditions.
In: Ship & Harbour (9), Hamburg, DVV Media Group GmbH, ISBN 0938-1643, pp. 180-185, 2014

Meißner, J.; Sender, J.; Schulz, J.-P.; König, A.:
Virtual protection of optical 3D sensors.
Selection and positioning of optical 3D-sensors in automated production plants. In: Productivity Management (2), Berlin, Gito mbH Verlag, ISSN 1868-8519, pp. 31-34, 2014

Momber, A.; Irmer, M.; Glück, N.:
Offshore coatings for low-temperature applications.
In: European Coatings Conference-Marine Coatings (March, 4-5 2014, Düsseldorf), Hanover, Vincentz Network GmbH & Co. KG, pp. 121-130, 2014

Schumann, M.; Büchler, D.; Fechner, M.:
Development of strand-laying-CFRP bridge systems with automated manufacturing processes.
In: CFK-Valley Stade Convention, pp. 50-55, 2014

Schröder, A.-K.; Nebl, T.; Mainzinger, C.:
Theoretical foundations of efficiently organising production processes: using the example of combining organisational forms of component manufacture and internal transport.
In: Journal of Industrial Engineering, Hindawi Publishing Corporation, pp. 1-27, 2014

Wanner, M.-C.; Glienke, R.; Busch, M.:
Preloaded hybrid connections with lock bolts and blind rivet studs.
In: Conference report T 39 – Joint research within mechanical joint technologies - 4. Joint colloquy of jointing technologies 2014, EFB Hanover 2014, pp. 41-50, ISBN 978-3-86776-448-3

Wanner, M.-C.; Glück, N.; Schumann, M.:
Joining of large structures. Mixed building as a chance within adherence technologies.
In: Adherence 'KLEBEN & DICHTEN' (7),Springer press, Wiesbaden, ISSN 1619-1919, pp. 16-20, 2014

Wanner, M.-C.; Glück, N.:
Adherence of large structures.
In: 14. Adherence technology colloquy – Joint research within adherence technology-Conference report, Frankfurt on the Main, Dechema, pp. 4-6, 2014

Wanner, M.-C.; Kothe, U.; Eggert, M.:
Action plan for restructuring the technology of a medium-sized shipyard.
In: Ship Science & Technology (7), Cartagena, COTECMAR, pp. 77-90, 2014

Weidemann B.; Sender, J.:
Productivity index of space planning in plants.
An approach to index based capacity planning of plant ressources using the example of ship industry.
In: Journal of economic plant running ZFW (3), Munich, Carl Hanser press, pp.113-116, 2014

Magazine Articles, Proceedings 2013

Ehrich, K.:
Custom Made Composite Supports for LNG Cargo Systems.
In: Proceedings of the Polar 2013, IRB-Verlag, pp 99-110

Fechner, M.; Gronwald, P.; Schumann, M.:
Increase in load bearing capacity of orthotropic decks through fibre-reinforced inliners.
In: Proceedings of the TechnoBond, industrial gluing technology symposium 2013, Memmingen, pp 331-332

Geist, M.; Grewe, O.:
Application-related TLS testing.
In: Contributions of the Oldenburger 3D-Tage 2013, pp 10-19

Geist, M.; Grewe, O.; Knaack, L.:
Application-related TSL testing and investigation of contour accuracy of phase comparison scanners.
In: Allgemeine Vermessungs-Nachrichten (2013)7, pp 243-251

Geist, M.; Knaack, L.:
Investigation of low-cost digitization systems for industrial applications.
In: Proceedings of the Go-3D "Computergraphik für die Praxis" 2013, pp 143-155

Gericke, A.:
Cost-effective process variant of submerged-arc welding in transverse position on large plate thicknesses for application on offshore structures and in shipbuilding
In: DVS reports volume 296, Große Schweißtechnische Tagung, Essen, DVS-Verlag, 2013, pp 1229-1234, ISBN 978-3-87155-614-2

Grewe, O.:
Use of laser scanners in construction of structural steelwork.
In: Schiff & Hafen 65(2013)3, pp 41-42

Harmel, A.:
Automatic clearing up and separating of components in cut sheet.
In: Schweißen und Schneiden 65(2013)6, pp 339-341

Henkel, K.-M.; Peters, R.; Gericke, A.; Sumpf, A.; Plenaitis, S.:
Development of a cost-effective process variant of submerged-arc welding in transverse position on large plate thicknesses for application on offshore structures and in shipbuilding.
In: DVS reports volume 296, Große Schweißtechnische Tagung, Essen, DVS-Verlag, 2013, pp 1-7, ISBN 978-3-87155-614-2

Sender, J.; Wanner, M.-C.:
Design of Production Systems for Large Maritime Structures.
In: 5th CARV 2013, Munich, 2013, pp 437-442

Sender, J.; Wanner, M.-C.:
Integrated capacity and layout planning.
In: ZWF, 108(2013)3, pp 2-5

Stranghöner, N.; Schiborr, M.; Glienke, R.; Wanner, M.-C.; Ulbrich, D.:
Non-slip joints in compliance with Eurocode 3 and DIN EN 1090-2.
In: Stahlbau 82(2013)10, pp 750-761

Ulbrich, D.; Primke-Engel, R.; Blunk, C.; Glienke, R.:
Mechanical joints in light metal structures.
In: Stahlbau 82(2013)11, pp 805-818

Wanner, M.-C.; Blunk, C.:
Experimental determination of the fatigue strength of shear-stressed lock bolt and blind rivet joints without component influence.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 79-84, ISBN 978-3-86776-415-5

Wanner, M.-C.; Fuchs, N.:
Requirements and options for the self-piercing riveting of aluminium wrought alloy in aircraft structure assembly.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 25-32, ISBN 978-3-86776-415-5

Wanner, M.-C.; Grewe, O.; Petkov, V.:
Surface capturing and automatic evaluation of CFK propeller structures.
In: Articles for the Oldenburger 3D-Tage 2013, pp 148-155

Wanner, M.-C.; Nehls, T.:
Numerical and experimental examinations of blind rivet-screw-systems.
In: Proceedings of the T 37, EFB Hanover, 2013, pp 103-108, ISBN 978-3-86776-415-5

Wanner, M.-C.; Nehls, T.:
Simulation-based design of function elements.
In: UTFscience, 2013/IV, pp 1-8

Magazine Articles, Proceedings 2012

Blunk, C.; Wanner, M.-C.:
Stress-based dimensioning of blind rivet seams with experimentally determined indicators
In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 103-107

Denkert, C.; Wanner, M.-C.:
Structural behaviour of prestressed mechanical joining fastenings in structural components made of composite fibre plastics In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 47-50

Glienke, R.; Wanner, M.-C.:
Dimensioning concept for lock bolt joints in steel and aluminium structures. In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 93-97

Grewe, O.; Geist, M:
Laser scanning as a tool for the filling of megayachts. In: Photogrammetry Laser Scanning Optical 3D Measurement Technology, Articles for the Oldenburger 3D-Tage 2012, T. Luhmann/C. Müller (publ.), pp. 63-69

Grewe, O.; Petkov, V.; Wanner, M.-C.:
Evaluation process and measurement conceptions for the geometric testing of CRP propeller structures In: Proceedings of the Go-3D2012 Conference, Fraunhofer-Verlag, 2012, pp. 17-30

Grewe, O.; Wanner, M.-C.:
Automatic surface capturing of CFK propellers. In: 8th International Conference on High Performance Marine Vehicles, 27.-28.09.2012, pp. 238-246

Henkel, K.-M.; Goldmann, F.; Gericke, A.; Hein, R.; Hinz, T.:
Improving ductility with alternating current during submerged-arc welding of S 690 QL 1 fine-grain steel for offshore applications. In: DVS Reports Volume 286, Große Schweißtechnische Tagung, Düsseldorf, DVS-Verlag, 2012, pp. 119-124

Henkel, K.-M.; Kutz, K.-H.; Banaschik, R.:
Investigations of the basic microstructure and dynamically loaded spheroidal graphite cast iron microstructures of real components In: Sonderbände der praktischen Metallographie 44, publ.: G. Petzow, 2012, pp. 211-216, ISBN 978-3-88355-392-4

Sender, J.; Wanner, M.-C.:
Integrated capacity and layout planning – Factory planning for large structure with tools from the digital factory. In: ZWF 108(2013)3, pp. 109-112

Sender, J.; Wanner, M.-C.; Weidemann, B.:
Type representatives for maritime large structures. In: Productivity Management 18(2013)1, pp. 57-60

Wanner, M.-C.; Ebert, A.; Strohbach, T.; Blunk, C.; Fuchs, N.:
Solid rivets can optimise aircraft final assembly. In: Ingenieurspiegel 2012/3, pp. 32-34

Wanner, M.-C.; Glienke, Ralf:
Status of R&D for thicker plates taking the example of wind energy In: Proceedings "Joint Research in Mechanical Production Technology" of the 2nd Joint Joining Technology Colloquium on 04.-05.12.2012 in Paderborn, 2012, pp. 33-40

Wanner, M.-C.; Sender, J.:
Simulation-based planning of panel lines. In: ZWF 107 (2012) 3, pp. 178-181

Wanner, M.-C.; Sender, J.; Herzig, O.:
Lean intralogistics for undirected material streams. In: Productivity Management 17 (2012) 3, pp. 47-50

Magazine Articles, Proceedings 2011

Büchler, D.; Elsken, T.; Glück, N.; Sier, M.; Bludzuweit. S.:
Ultralight space cell Development of ultralight large structures of fibre composite and hybrid construction for the shipbuilding sector In: Proceedings of the Status Day Shipping and Ocean Technology, 2011, pp. 25-45, ISBN 978-3-89336-745-0

Grewe, O.:
Computer-aided computation and analysis of yacht surfaces. In: Proceedings of the Go-3D Conference 2011, pp. 125-135, ISBN 978-3-8396-0275-1

Grewe, O.; Hoffmann, U.; Wanner, M.-C.:
Assessment of the surface finish of megayachts  In: Yearbook of the Shipbuilding Association, 104th Volume, 1010, pp. 308-318, ISBN 978-3-87700-129-5

Irmer, M.; Sendker, N.; Heinrich, S.:
Film vs. paint Changing of the guard in shipbuilding corrosion protection. In: Ingenieurspiegel (2011)2, pp. 62-63

Kröger, H.; Bludzuweit, S.; Fröhlingsdorf, W.; Grewe, O.; Bartke, S.; Kliewe, C.:
CFK Prop 6 m Development of design, simulation and testing methods for 3D reinforced CFRP propeller structures up to 6 m diameter  In: Proceedings of the Status Day Shipping and Ocean Technology, 2011, pp. 75-90, ISBN 978-3-89336-745-0

Wanner, M.-C.; Glienke, R.:
Use of maintenance-free mechanical joints in steel structures.  In: DVS Report Volume 275, Lareg Welding Engineering Conference, 2011, pp. 356-365, ISBN 978-3-87155-267-0

Wanner, M.-C.; Glienke, R.; Blunk, C.:
Development of hybrid joints in metal materials with respect to load-bearing strength and leak-tightness. In: UTFScience, 2011/III, pp. 1-29

Wanner, M.-C.; Henkel, K.-M.; Anders, M.; Hein, R.:
Enhancement of joining quality of galvanized machine structures by MIG soldering  In: DVS Report Volume 275, Large Welding Engineering Conference, 2011, pp. 390-394, ISBN 978-3-87155-267-0

Wanner, M.-C.; Henkel, K.-M.; Blunk, C.; Glienke, R.:
Development of hybrid joints in metal materials with respect to load-bearing strength and leak-tightness.  In: High-strength and hybrid materials, Conference proceedings T32,  EFB Hanover, 2011, pp. 445-484, ISBN 978-3-86776-363-9

Wanner, M.-C.; Henkel, K.-M.; Hein, R.; Dörge, A.; Bockelmann, M.:
Increasing the deposition rate during submerged-arc welding of water-quenched high-strength fine-grain structural steels for offshort applications.  In: DVS Report Volume 277, Welding in Shipbuilding and Engineering, 2011, pp. 7-12, ISBN 978-3-87155-269-4

Wanner, M.-C.; Henkel, K.-M.; Hein, R.; Anders, M.:
Investigations into automated robot-guided edge machining of shipbuilding steel using plasma methods.  In: DVS Report Volume 279, Robots – Cost-effective production thanks to joining automation, 2011, pp. 72-78, ISBN 978-3-87155-271-7

Wanner, M.-C.; Sender, J.:
Efficient use of material flow simulation in shipyard planning. In: Productivity Management 16(2011)1,  pp. 30-32

Zych, A.; Wanner, M.-C.:
Automatic sensor-based robot programming.  In: DVS Report Volume 279, Robots – Cost-effective production thanks to joining automation, 2011, pp. 79-85, ISBN 978-3-87155-271-7

Magazine Articles, Proceedings 2010

Fuchs, N.; Wanner, M.-C.; Henkel, K.-M.:
Alternative joining procedures in outfitting processes. 
In: Schiffbauforschung  49(2010)1, p. 66-78, ISBN 978-3-87155-584-8

Fuchs, N.; Wanner, M.-C.; Henkel, K.-M.:
Alternative joining procedures in outfitting processes.
In: Hansa 147(2010)9, p. 59-64

Grewe, O.; Geist, M.:
Use of terrestrial laser scanners for engineering processes in shipbuilding.
In: Proceedings of Conference Go-3D 2010, S. 39-54
ISBN 978-3-8396-0164-8

Hurtienne, M.; Kahnfeld, A.; Henkel, K.-M.:
Production and welding assembly of the steel panel façade of the Ozeaneum in Stralsund
In: DVS Report, Volume 267, 2010, page 140-147, ISBN 978-3-87155-592-3

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.:
Quality assurance of blind rivet and lock bolt connections by riveting process monitoring and non-destructive clamping force determination.
In: Conference Proceedings T 31, EFB Hanover, 2010, p. 105-122

Wanner, M.-C.; Sender, J. ; Kothe, U.; Bohnenberg, R.:
Long term capacity planning in the shipbuilding industry.
In: Proceedings for 43rd CIRP International Conference, Vienna, 2010, S. 909-916
ISBN 978-3-7083-0686-5

Magazine Articles, Proceedings 2009

Bohnenberg, R.; Wanner, M.-C.; Grewe, O.; Sender, J.:
Application of 3-D Computer Graphics for Reorganizing Shipyards.
In: Go-3D 2009 “Go for Innovations”. Proceeding of the Conference Go-3D on August 31, 2009 in Rostock. Rostock: Fraunhofer IGD, p. 7-21, ISBN 978-3-8396-0044-3

Dörge, A.; Henkel, K.-M.; Wanner, M.-C.:
Examinations of the Increase of the Assembly Speed of Large Sections in Shipbuilding by Electro Gas Welding.
In: Die Verbindungsspezialisten 2009. DVS-Berichte Band 258, Düsseldorf: DVS-Verlag, 2009, p. 163-166, ISBN 978-3-87155-584-8

Kothe, U.:
Process Capability Factors in the Production of Curved Panels
WMTC World Maritime Technology Conference & Exhibition 2009 Technical Paper Presentation – Session 2A, Paper No. 1, Mumbai, 17 p. (CD)

Wanner, M.-C.:
“Pro-Dock”-Enhancement of Production Capacities by Means of a Reduction of Dock Lay Times and Preceeding Processes.
In: BMWI-Statustagung Schifffahrt und Meerestechnik, 2009, P. 111-118

Wanner, M.-C.:
Improved Productivity in the Production of Naval Vessels.
In: 50 Jahre produktionswissenschaftliche Forschung und Lehre, Munich: Oldenbourg Verlag, 2009, p. 449-462, ISBN 978-3-486-59072-2

Wanner, M.-C.:
Ships.
In: H. J. Bullinger (Editor) – Technology Guide: Principles-Applications-Trends, Berlin: Springer-Verlag, 2009, P. 300-303

Wanner, M.-C; Czarnietzki, R.:
Examination of Selected Production Sequences in Panel and Unit Manufacturing on a Compact Shipyard.
In: EPP 14(2009)1, p. 44-48

Wanner, M.-C.; Henkel, K.-M.; Herzog, P.; Fuchs, N.; Glienke, R.:
Application of Blind-Riveted Functional Elements in Selected Component Materials.
In: UTFScience, IV/2009, p. 1-15

Magazine Articles, Proceedings 2008

Anders, M.; Henkel, K.-M.; Wanner, M.-C.:
Survey for Edge Preparation on Shipbuilding Steel by Means of Plasma Processes

Die Verbindungsspezialisten 2008, DVS reports, volume 250, Düsseldorf: DVS-Verlag, 2008, pp. 384-390, ISBN 978-3-87155-256-4

Fuchs, N.; Henkel, K.-M.; Wanner, M.-C.:
Alternative Assembly Methods for the Equipment in  Shipbuilding Finishing

Die Verbindungsspezialisten 2008, DVS reports, volume 250, Düsseldorf: DVS-Verlag, 2008, pp. 446-448, ISBN 978-3-87155-256-4

Wanner, M.-C.; Kothe, U.:
Shipbuilding Engineering at the University of Rostock
In: Ingenieurspiegel Mai 2008, pp. 56-57

Wanner, M.-C.; Bohnenberg, R.; Weidemann, B.; Zych.:
Production-Oriented Approaches for the Increase of  the Production in Shipyards

In: Hansa 145(2008)8, pp. 56-59

Wanner, M.-C.; Zych, A.; Pfletscher, U.:
Automatic Robot Programming System for Welding Robots in Micro-Panel Production

In: Schiffbauforschung 47(2008)1, pp. 39-4

Wanner, M.-C.; Bohnenberg, R.; Czarnietzki, R.:
Simulating the Flow of Material in Maritime Industries
In: LandesTechnologieAnzeiger 13(2008)3, p. 19

Wanner, M.-C.; Pfletscher, U.; Zych, A.:
Developing Relief Models with Industrial Robots
In: LandesTechnologieAnzeiger 13(2008)4, pp. 8-9

Weidemann, B.; Wanner, M.-C.:
Development Trends on Productivity Increase in Shipbuilding and in the Maritime Supply Industry

In: Hansa 145(2008)9, p. 112-116

Wanner, M.-C.:
The Robot Welds What It Sees. High Productivity in Shipbuilding by Applying Modern Technologie

In: Traditio et Innovatio, Forschungsmagazin der Universität Rostock 13(2008)2, pp. 29-30

Weidemann, B.; Bohnenberg, R.; Wanner, M.-C.:
Shipyard Investment Planning by Use of Modern Process-Simulation and Layout-Planning Tools

7th International Conference on Computer and IT Applications in the Maritime Industries COMPIT ‘08, Liège, 21.-23.04.2008, pp. 350-363,  ISBN 10 2-9600785-0-0, ISBN 13 978-2-9600785-0-3

Magazine Articles, Proceedings 2007

Wanner, M.-C.; Henkel, K.-M ; Delin, M.:
Density and Bearing Capacity in Material and Coat Variation of Retaining Ring Bolts and Blind Rivet Joints
In: Tagungsband zum EFB-Kolloquium T 27, Hannover: Druckteam GmbH, 2007, p. 127-137, ISBN 978-3-86776-221-2

Wanner, M.-C.; Füssel, U.; Henkel, K.-M.; Delin, M.; Liebrecht, F.; Six, S.:
Sealing Systems for Mechanical Joining Systems with Prepunch Hole Operation.
In: EFB-Forschungsbericht Nr. 261, Hannover, 2007,ISBN 978-3-86776-222-9

Wanner, M.-C.; Kunkel, J.:
Accuracy Control for the Final Finish of Mega-Yachts.
In: Schiffbauforschung 46(2007)1, p. 64-73

Wanner, M.-C.:
Applied Quality Inspection for Material and Interconnect Testing.
In: VDI-/VDE Zeitschrift Mensch und Technik, 2007/III, p. 10-11

Weidemann, B.; Wanner, M.-C.:
Web-based Project and Document Management.
In: Landestechnologieanzeiger 2007/2, p. 8-9

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.:
Alternative Joining Technologies in the Final Assembly of Equipment Components in Shipbuilding Technology.
In: Hansa 144(2007)11, p. 53-57

Wanner, M.-C.; Delin, M.:
Evaluation of Load-bearing Characteristics of Mechanically Joined Connections.
UTFSience, 2007/IV, p. 1-6

Wanner, M.-C.; Henkel, K.-M.; Fuchs, N.; Delin, M.:
Tightness and Mechanical Strength of Lock Bolts and Blind Rivet Joints in Depending on Different Materials and Surface Coatings.
In: BLECHbusiness 2007 Conference “Technologies to Maximise Productivity in Sheet Metal Working”, Proceedings T28, 2007, p. 35-47
ISBN 978-3-86776-302-8

Magazine Articles, Proceedings 2006

Gosewehr, W.; Läritz, C.; Noth, A.:
Articulated arm handels pressure die-casting parts.
In: Kunststoff-Magazin (2006)4, p. 36-37

Grothkopp, B.; Felkel, F.; Kunkel, J.; Schneidenbach, R.; Wanner, M.-C.:
Determination of manufacturing precision and derivation of quality-increasing measures in ship hull construction.
In: Hansa 143(2006)9, p. 131-134

Wanner, M.-C.:
Digital shipyard. 
In: Wissensmeer. Das Journal für die Wissenschaftsgemeinschaft Region Rostock, Nov. 2006, edition 5, p. 29

Wanner, M.-C.; Wurst, O.:
Sensor system for weight management in ship construction. 
In:LandesTechnologieAnzeiger, 2006/1, p. 14-15

Wanner, M.-C.; Czarnietzki, R.:
Simulation-supported manufacturing control station for the production of cooling systems. 
In: PPS-Management 11(2006)2, p. 43-46

Wanner, M.-C.; Henkel, K.-M.; Schneidenbach, R.:
Tailored joining methods for hybrid constructions from GRP and metal in large scale production of yachts.
In: Schiffbauforschung 45(2006)1, S. 104-115

Wanner, M.-C.; Czarnietzki, R.:
Interactive planning of maritime production facilities. 
In: LandesTechnologieAnzeiger, 2006/3, p. 5

Wanner, M.-C.; Henkel, K.-M.; Herzog, P.; Delin, M.:
Influence of component coating on the load-carrying capacity of retaining ring bolt connections.
In: UTFScience, 2006/III, p. 1-8

Wanner, M.-C.; Füssel, U.; Delin, M.; Henkel, K.-M.; Six, S.; Liebrecht, F.:
Tightness of mechanically joined blind rivet and retaining ring bolt connections. 
In: UTFScience, 2006/IV, p. 1-7

Wanner, M.-C.; Delin, M.; Henkel, K.-M.;
Designing retaining ring bolt connections. Evaluating shear-based stiffness analyses.
In: wt Werkstattstechnik online 96(2006)11/12, p. 879-883

Wanner, M.-C.; Henkel, K.-M.:
Joining technologies for new materials.
In: LandesTechnologieAnzeiger, 2006/4, p. 18

Weidemann, B.; Wanner, M.-C.:
Reducing costs, keeping the appointed time and improving the quality. Web-based project management for collaboration of suppliers. 
In: Hansa 143(2006)12, p. 33-35

Magazine Articles, Proceedings 2005

Aeffner, K.; Papendieck, K.-H.; Klehn, B.; Wanner, M.-C.; Weidemann, B.:
Development of a propulsion string in MariCoNet.
In: Hansa 142(2005)1, p. 45-48

Czarnietzki, R.; Lüsch, S.; Wanner, M.-C.; Wenzel, H.:
Simulation of loading and unloading processes in RoRo ferries.
In: Hansa 142(2005)4, p. 32-37

Peter, S.:
Analysing the influences of selected parameters on the duration of loading and unloading of a RoRo ferry.
In: Jahrbuch der Schiffbautechnischen Gesellschaft, Berlin: Springer-Verlag, Vol. 99, 2005, p. 395- 399

Wanner, M.-C.; Czarnietzki, R.; Zych, A.:
New interactive tools for the production planning and control in ship production. 
In: PPS Management 10(2005)4, p. 28-31

Wanner, M.-C.; Henkel, K.-M.; Alraheb, O.:
Simulation of the setting process and the shearing stress applicable to retaining ring bolt connections. 
In: Konstruktion 57(2005)1/2, p. 71-75

Wanner, M.-C.; Henkel, K.-M ; Becker, B.; Thoms, V.; Bräunling, S.:
Using  high-power ultra sound to reduce transformation forces in clinching.
In: wt Werkstattstechnik online 95(2005)10, p. 803-808

Wanner, M.-C.; Henkel, K.-M.; Becker, B.; Thoms, V.; Timm, M.:
Clinching steel and aluminium materials under the influence of high-power ultra sound. 
In: UTFscience 2005/I, p. 1-4

Wanner, M.-C.; Kothe, U.:
Application of the Six-Sigma strategy for the production of ship sections.
In: Hansa 142(2005)9, p. 70-73

Wanner, M.-C.; Kothe, U.:
Application of SPC instruments in the production of curved panels.
In: Schiffbauforschung 44(2005)1, p. 80-96

Wanner, M.-C.; Kothe, U.:
Precision production of curved shipbuilding structures.
In: LandesTechnologieAnzeiger 3/2005. p. 6

Wanner, M.-C.; Weidemann, B.:
Development of the maritime supply industry in enterprise networks. 
In: LandesTechnologieAnzeiger 3/2005, p. 5

Weidemann, B.:
Make-or-buy decisions in engineering.
Jahrbuch der Schiffbautechnischen Gesellschaft, Berlin: Springer-Verl., 98. Band 2004, 2005, p. 143-147

Magazine Articles, Proceedings 2004

Czarnietzki, R.; Felkel, F.; Frick, C.; Gerschau, H.P.; Heller, T.; Wanner, M.-C.; Zych, A.:
Development of new interactive tools for planning the surface density and resources for a continuous construction schedule: 4D-surface density planning.
In: Hansa 141(2004)7, p. 27-29

Nolde, P.; Meyer, B.; Sarhil, Y.:
Cold crack formation in high-strength welding products and its avoidance.
In: Schiffbauforschung 42(2003)4, p. 3-10

Thoms, V.; Six, S.; Wanner, M.-C.; Herzog, P.; Henkel, K.-H.; Al-Raheb, O.:
Designing retaining ring bolt connections in mixed material constructions under thermal load.
In: UTF science III/2004, p. 1-7

Wanner, M.-C.; Kunkel, J.:
3-D laser scanner: Measuring large structures in ship construction.
In: Landestechnologieanzeiger 3/2004, p. 14-15

Wanner, M.-C.; Henkel, K.-M.:
Static/dynamic strength, rigidity and corrosion: Testing connections and material.
In: Landestechnologieanzeiger 4/2004, p. 12

Wanner, M.-C.; Henkel, K.-M.; Al Raheb, O.:
FE simulation of thermal load on retaining ring bolt connections in mixed steel-aluminium constructions.
In: wt Werkstattstechnik online, 94(2004)10, p. 562-565

Wanner, M.-C.; Henkel, K.-M.; Al Raheb, O.:
Simulation of thermal load on retaining ring bolt connections in mixed steel-aluminium constructions.
In: Tagungsband 11. Paderborner Symposium Fügetechnik, Mechanisches Fügen und Kleben, ISBN 3-9809524-1-X, 2004, p. 124-134

Wanner, M.-C.; Kunkel, J.; Felkel, F.:
High-precision measuring of evenness.
In: Hansa 141(2004)10, p. 17-19

Wanner, M.-C.; Kothe, U.; Schneidenbach, R.; Kunkel, J.; Pfletscher, U.:
Accurate construction of bi-axial curved surfaces and volume building elements of steel (curved panel) – continued. .
In: Final report A 169/S24/10018/01(AVIF), Dezember 2004

Wurst, Schubert, B.; Wanner, M.-C.:
Mobile determination of weight and gravitation centres of large structures.
In: wt Werkstattstechnik online 94(2004)5, p. 226-230

Wanner, M.-C.; Wurst, O.:
Mobile measuring system for large structures.
In: IEEE-Conference on Mechatronics & Robotics, Conference Proceedings, September 2004, Aachen, ISBN 3-938153-50-X, 2004, Page 1552-1556

Wanner, M.-C.; Wurst, O.:
Weight management in ship construction.
In: Schiffbauforschung 43(2004)2, p. 51-58

Magazine Articles, Proceedings 2003

Czarnietzki, R.; Heller, T.:
Application and use of a simulation-supported production station for sheet processing.
VZB / EFB Conference proceedings: Optimimisation of production flows in sheet processing. ISBN 80-239-1768-4, 2003, Prague

Czarnietzki, R.; Heller, T.:
Simulation-supported system for planning, contract management and control of sheet processing.
EFB- Conference proceedings T23: Optimization of production flows in sheet processing. 3/2003, Fellbach near Stuttgart

Czarnietzki, R.; Heller, T.:
Simulation-supported tool for planning and managing SMEs. Fraunhofer Anwendungszentrum Großstrukturen in der Produktionstechnik,
Rostock, 2003, Final report on the research commissioned by the Ministry for Trade and Industry of Mecklenburg- Lower Pomerania Az.: V430-630.5-430

Meyer, B.; Nolde, P.; Diers, G.; Sarhil, Y.; Rosert, R.:
Developing new and optimising existing MSG filling wires for the welding of high-strength fine-grained steels.
DVS reports, volume 225, p. 443 – 451

Neumann, M.; Wanner, M.C.; Weidemann, B.:
Maritime cooperation network (MariCoNet).
Hansa, 120. year’s issues 2003, No.10, S. 68 – 69

Neumann, M.; Wanner, M.C.; Weidemann, B.:
Internet based co-operation between supplier and shipyards in the maritime co-operation network,
COMPIT - conference proceedings, Hamburg 14. – 17.05.2003, p. 297 – 307

Thoms, V.; Wanner, M.C.; Six, S.; Herzog, P.; Al-Raheb, O.; Henkel, K.-M.:
Designing retaining ring bolt connections in mixed material constructions under thermal load,
Joint project of TU Dresden, Institute for Production Engineering and University of Rostock, Institute for Production Engineering and Logistics, 2003 – Research report No. 217

Wanner, M.C.; Al Raheb,0; Henkel, K.M.:
Determining strength properties of retaining ring bolt connections,
wt Werkstatttechnik online, year’s issue 93 (2003), volume 10, p. 719 – 722

Wanner, M. C.; Kothe, U.; Nikolay, P.; Schneidenbach, R.:
Designing mobile welding data recording in ship construction,
Conference proceedings, 4th special conference welding in ship production and engineering production, p. 118 – 130

Wanner, M.C.; Kunkel, J.; Pfletscher, U.:
3-D measuring of large structures
Schiffbauforschung 42, year’s issue (2003), No. 3, p. 9 – 108

Magazine Articles, Proceedings 2002

Czarnietzki, R.; Heller, T.:
Simulation supported planning, order management and control system for steel construction.
16th Symposium of simulation technology ASIM 2002, 10 September 2003, p. 131-137

Czarnietzki, R.; Heller, T.:
Simulation-supported control station with integrated process model generation for steel construction enterprises.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 - research report on the research project commissioned by AiF “Otto von Guericke“ e.V., Berlin, funding no. KF 00499901

Czarnietzki, R.; Neumann, M.; Palm, D.; Pfletscher, U.:
Attractive problem solutions in shipbuilding from Rostock,
Interaktiv – magazine of Fraunhofer IPA 3/02 (2002), p. 3 und p. 6-8

Mc-Pherson, M.; Wanner, M.C.:
Tecnica de Manufactura-Separata Elaboración de materiales por desprendimiento de particulas con medios mecánicos,
Joint publication of Oriente University / Cuba and Rostock University Germany, 2002

Wanner, M.C.; Kunkel, J.:
Three-dimensional measuring and automated sample comparison of large structures in production engineering.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 – - research report on the research project ordered by Kultusministeriums M-V (TEAM), funding no. 9801090

Wanner, M.C.; Koethe, U; Nikolay, P.; Schneidenbach, R.; Wiebeck, E.:
Basics of precision production of fore and aft complex sections on ships.
University of Rostock, Institute for Production Engineering and Logistics, Rostock, 2002 - research report on the research project commissioned by BMBF Schifffahrt und Meerestechnik, funding no. 18S01909

Wanner, M.C.; Neumann, M.:
Measures for the extension of work and jobs in innovation growth cores of industry in the town and region of Wolgast.
Final report, parts I and II, August 2002

Wenzel, H.J.; Czarnietzki, R.; Wurzler, B.:
Designing interdisciplinary engineering processes with high time parallelity for the construction of specialized ships.
Aker–MTW Werft GmbH Wismar, 2002 – research report on the research project commissioned by BMBF Schifffahrt und Meerestechnik, funding no. 18S0181

Zorn, H; Henkel, K.-M.; Herzog, P.:
Stability properties of retaining ring bolt connections, Sheet irons, pipes, profiles
UTF Science, Meisenberg Verlag, 50 (2002), 1, p. 15-19