Bachelor Papers

Complete list of Bachelor Papers

Ahrndt, Johannes – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Simulation-based track planning for a welding application for the joining of pipe nodes with a redundant manipulator application, 2015

Boyens, Oliver – Supervisor: M.Sc. K. Jagusch
Development of a system to control a driverless transport system, 2015

Gatzke, Johannes – Supervisor: Dipl.-Ing. A. Harmel
Construction and evaluation of a mechanism for the simultaneous adjustment of the variable length between two coupling rods running in parallel, 2015

Haß, Annika – Supervisor: Dipl.-Ing. N. Glück
Experimental investigation of force application elements for composite structures

Heide, Dennis – Supervisor: Dr. rer. pol. A.-K. Schröder
Optimisation of the collaboration between the plant logistics and the logistics of the technical development section in the VW plant in Osnabrück, 2015

Herold, Arne – Supervisor: Dr.-Ing. N. Fuchs
Optimisation of a holder system for the 3D laser cutting of deep-drawn sheets, 2015

Jericho, David – Supervisor: M.Sc. K. Jagusch
Development of a control concept for an intelligent working table based on non-contact data collection, 2015

Kibellus, Tom – Supervisor: M.Sc. L. Fröck
Investigation of the influence of liquids on adhesives, 2015

Kruschinski, Felix – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Investigation of complex electrochemical and thermochemical reactions in submerged arc welding with various material combinations, 2015

Nickel, Paul –  Supervisor: Dr.-Ing. N. Fuchs
Development of a die concept for the formed joining of of plate of greater thicknesses

Prochnow, Oliver – Supervisor: Dr. rer. pol. A.-K. Schröder
Comparison and interface examination of the of functional safety in the machine and process industry, 2015

Schramm, Nils – Supervisor: Dipl.-Ing. N. Glück
Development of a methodology for the selection and design of clamping technology for RIM shaping dies, 2015

Voß, Paul – Supervisor: M.Sc. S. Lauer
Development and design of a lightweight robot arm with an axial connection for a load of 250 kg, 2015

Yang, Fan – Supervisor: Dipl.-Wirt. Ing K. Ehrich
Determination of the properties of adhesives that do not burn / are only sparingly inflammable for industrial use, 2015

Baumgart, Luciano – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis and development of propeller class-specific strategies for the automated drilling of ship propellers with the aid of 3D robot simulation, 2015

Bludau, Danny – Supervisor: Dr. rer. pol. A.-K. Schröder
Analysis and evaluation of algorithms in machine capacity planning, 2015

Brandenburg, Kay – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Cinematographic and thermal process investigation when welding with the targeted application of vibration into the fusion bath and derivation of production management effects, 2015

Franz, Jan-Eric – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Perspectives of additive manufacturing procedures with special consideration of arc welding and economic points of view, 2015

Ganschow, Jörg – Supervisor: Dr. rer. pol. A.-K. Schröder
Analysis of options for the collection of hazardous substance-specific information within the scope of the IMO guideline for ship recycling, 2015

Girbardt, Leonie – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Technological and economic investigation of slag recycling in submerged arc welding, 2015

Götting, Sören – Supervisor: Dr. rer. pol. A.-K. Schröder
Requirements in shipyards when drawing up a register of hazardous substances - An analysis in connection with the IMO guideline for ship recycling, 2015

Heise, Susanne – Supervisor: M.Sc. Wirt.-Ing. M. Eggert
Optimisation of an application for the collection of operating data for touch-controlled non-portable devices, 2015

Hollmann, Matthes – Supervisor: M.Sc. K. Jagusch
Development of an innovative operating concept for virtual installation manuals, 2015

Maaß, Nicholas – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis, evaluation and selection of localisation systems and strategies for the storage of large steel parts in the indoor and outdoor area with the aim of planning the storage capacity, 2015

Nielson, Esko – Supervisor: Dr. rer. pol. A.-K. Schröder
Industry 4.0 - Analysis of the requirements for Quality Management, 2015

Prause, Christoph – Supervisor: Dipl.-Wirt. Ing J. Sender
Conceptual design of versatile production layouts in shipbuilding, 2015

Redemund, Klaus – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis and experimental implementation of the automated handling of parts placed in no particular order - at random, 2015

Schmatz, Frederik – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Conceptual design and implementation of a software-based resources capacity and allocation system for the mechanical test laboratory at Fraunhofer AGP Rostock, 2015

Soehring, Philipp – Supervisor: Dipl.-Wirt. Ing J. Sender
Simulation-based optimisation of shipyards, 2015

Stegmann, Lennart – Supervisor: M.Sc. R. Staschko
Investigations of the influence of the settling process steps on the delamination of punch-riveted composite fibre parts, 2015

Wirths, Wim – Supervisor: M.Sc. P. Froitzheim
Investigation of ultrasound-based punch-riveting for sheet, plate and CFRP joints, 2015

Gericke, Horst – Supervisor: Dipl.-Eng. Robert Hein
Influence of ferric-aluminium-boric-alloys on mechanical-technologic characteristics of CuSi3-dissolved joints, 2014

Heyn, Amadeus Bogomil – Supervisor: Dipl.-Econ. Eng. J. Sender
Analysis of wireless communication concepts of driverless transport systems within production, 2014

Holleitner, Felix – Supervisor: M.Sc. T. Nehls
Material parameter detection for numeric simulation on real units, 2014

Humpert, Daniel – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Analysis of frequency-dependent heat-generation within dynamic inspection of fibre-reinforced synthetics, 2014

Jandejsek, Daniel – Supervisor: Dipl.-Eng. N. Glück
Verification of the interchanging stability of reinforced loop connections within unit trials, 2014

Kappel, Oliver – Supervisor: Dipl.-Eng. F. Heßeln
Experimental analysis of adhensive attrition at clinching with ultrasonic assistance, 2014

Kappis, Lukas Vincent – Supervisor: M.Sc. S. Schmidt
Experimental testing of methods producing rotor blades of small wind energy plants, 2014

Knöchelmann, Florian – Supervisor: Dipl.-Eng. C. Denkert
Segmentation of CAD models to use mapping methods, 2014

Komorowski, Alex David – Supervisor: M.Sc. L. Fröck
Development and testing of devices cutting fibre-reinforced rods to length, 2014

König, Moritz – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Selection and qualification of a MS polymer sealant, 2014

Kureck, Tom – Supervisor: M.Sc. Wirt-Eng. Andreas Gericke
Analysis of a combined influence of VWC on internal stress and mechanical-technological characteristics of submerged arc welded joints, 2014

Leingang, Daniel – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Analysis of the shear strengh of fibreglass-reinforced epoxy resins in use for support material, 2014

Lindloff-Rühse, Jens – Supervisor: M.Sc. L. Fröck
Testing the adherence of pipe sleeves under climate changing conditions, 2014

Loske, Cora – Supervisor: Dipl.-Econ. Eng. J. Meißner
Integration of an optical 3D measuring sensor within the simulation Delmia V5, 2014

Malagic, Malik – Supervisor: Dipl.-Econ. Eng. N. Fuchs
Analysing solid cut rivets of mixed joints from aluminium and composite fibre material with different rivet geometrics, 2014

Möller, Katharina – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Procedual analysis in production of polyamide made from monomers, 2014

Pechmann, Alberecht – Supervisor: M.Sc. S. Schmidt
Analysis of potentials reducing weight of a commercial flexible arm robot, 2014

Perlick, Toni – Supervisor: M.Sc. K. Jagusch
Development of a data recording system using process visualization via 3D mounting instructions, 2014

Rami, Abou Said – Supervisor: Dr.-Eng. U. Kothe
Development of a system comparing parametres within productivity (benchmarking) in ship repair, 2014

Sachse, Till – Supervisor: M.Sc. K. Jagusch
Development of a controlling concept at 'the intelligent workingplace', 2014

Schröder, Ingomar – Supervisor: M.Sc. S. Schmidt
Development of a concept connecting a CFR robot arm, 2014

Serduk, Roman – Supervisor: Dipl.-Eng. A. Kacaras
Procedural analysis of polymer production from monomers, 2014

Streckfuß, Ulrich – Supervisor: Dr.-Eng. U. Kothe
Approaching the evaluation of manufacturing system's energy flexibility, 2014

Wegner, Hendrik – Supervisor: M.Sc. K. Jagusch
Development of a quality management system within manual mounting with the help of optical systems, 2014

Werner, Hannes – Supervisor: Dipl.-Eng. A. Harmel
Interpretation of a screw circle according to VDI2230 in comparison with an FE simulation, 2014

Zech, Aenne – Supervisor: Dr.-Eng. U. Kothe
Properties of maritime vessels in shallow, icegoing water and resulting characteristics within ship body construction, 2014

Zickermann, Mirco – Supervisor: M.Sc. Econ.-Eng. A. Ebert
Influence of punched and drilled holes on fatigue stability of hot-galvanized non-slip connections, 2014

Baudisch, Martin – Supervisor: M.Sc. T. Nehls
Analysis of irregularities at the setting process of a selected lockbolt system, 2014

Becker, Alexander – Supervisor: Dipl.-Econ. Eng. J. Meißner
Process analysis and construction of the montage of selected building units considering ergonomic, economic and technological aspects, 2014

Bolsmann, Alexander – Supervisor: M.Sc. K. Jagusch
Conceptualization of a driving unit for working tables for the manual montage of large units, 2014

Gerhards, Alexander – Supervisor: Dipl.-Econ. Eng. J. Sender
Detection of a productivity index within panel production, 2014

Haaker, Insa – Supervisor: M.Sc. Wirt-Eng. Andreas Gericke
Market analysis and trend reports developing de facto heat-resistant jointing and separating methods, 2014

Junge, Susann – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and systematization according to recent security technologies within human-robot-interaction in use for mobile robots, 2014

Lehmann, Nick – Supervisor: Dipl.-Eng. F. Beuß
Analysing the profitability of human-robot-collaboration within mounting processes, 2014

Lück, Thomas – Supervisor: Dr. rer. pol. A.- K. Schröder
Analysis and rationalization of an energy-oriented configuration planning, 2014

Portwich, Paul – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and evaluation of the indoor tracking system Ubisense RTLS, 2014

Prior, Ninja – Supervisor: Dipl.-Econ. Eng. J. Meißner
Systematization of industrial, optical 3D measuring sensors for developing a sensor library in the context of virtual 3D sensor protection, 2014

Scheidt, Maximilian – Supervisor:  M.Sc. C. Klötzer
Development of a flexible span and guiding device for areal grinding of welded ferric sections unto 600mm length to be based on pre-selected mobile grinding units, 2014

Somodi, Robert – Supervisor: Dipl.-Eng. F. Beuß
Technical interpretation of fixing slots used for racks in the field of large structures, 2014

Theiß, Romy – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and systematization according to recent security technologies within human-robot-interaction in use for stationary robots, 2014

Wagner, Felix – Supervisor: M.Sc. Econ.-Eng. M. Eggert
Multiple machine operation within plant simulation, 2014

Winkels, Denise – Supervisor: Dipl.-Econ. Eng. J. Meißner
Classification of modular service contracts for electric engines and converters used by Siemens AG in the field of product live management as well as developing a training concept to be used by the sales staff, 2014

Witting, Sergej – Supervisor: Dipl.-Econ. Eng. J. Meißner
Simulation assisted offline programming of a UR10 light weight robot to be used at ship bodies, 2014

Zickermann, Mirco – Supervisor: M.Sc. Econ.-Eng. A. Ebert
Influence of punched and drilled holes on fatigue stability of slip-resistant joints wit
, 2014

Blumöhr, Torben – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a method for the selection of transport systems in shipyard planning, 2013

Dietrich, Christian – Supervisor: Dipl.-Ing. F. Beuß
Technical design of a heavy load link apron cover for use in work piece holders in the area of large structures, 2013

Dubberke, Lisa – Supervisor: Dipl.-Ing. F. Beuß
Virtual ergonomic analysis with regard to economic aspects, 2013

Dörre, Maik – Supervisor: Dipl.-Ing. C. Denkert
Investigation of function element screw fittings within the meaning of Directive VDI 2230, 2013

Fischer, Markus – Supervisor: Dipl.-Wirt. Ing. J. Sender
Capacity and layout planning taking the construction of container ships as an example, 2013

Grapp, Daniel – Supervisor: Dipl.-Ing. F. Beuß
Concept development for the combination of virtual investigations and CAD software, 2013

Hempel, Florian – Supervisor: M.Sc. K. Jagusch
Development of a train shuttle concept between the train formation depot Maschen and the Hamburg harbour (Waltershof) with regard to economic and qualitative aspects, 2013

Hochfeld, Christopher – Dr.-Ing. habil. K.-M. Henkel
Design and construction of welded connections in high-strength load-bearing structures in offshore wind energy units, 2013

Katzer, Tom – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis, optimisation and establishment of a process for the preparation and servicing of drills in the assembly of the structure for the A350XWB, 2013

Kelling, Robert – Supervisor: Dipl.-Ing. R. Glienke
Experimental investigations of the characterisation of the load-bearing characteristics of preloaded hybrid joints, 2013

Klink, Steffen – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Determination of the vibration behaviour of a screw test stand through experimental modal analysis, 2013

Krohn, Matti – Supervisor: Dr.-Ing. habil. K.-M. Henkel
Investigation of laser beam-welded T-joints on the S355, 2013

Krüger, Torsten – Supervisor: Dipl.-Ing. R. Glienke
Development of a construction suitable for screw connection for vehicle superstructures on the basis of welded constructions, 2013

Mönning, Peter – Supervisor: Dipl.-Ing. A. Kacaras
Controller implementation of the "cross-winding" winding pattern in the laboratory winding unit, 2013

Nitschke, Tony – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Characterisation of the joints of lattice tower structures for wind energy units regarding their static and dynamic properties, 2013

Pauluhn, Eik – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of the work times of assembly processes for a special ship, 2013

Perschnick, Bertram – Supervisor: Dipl.-Ing. F. Beuß
Markerless tracking of gestures in virtual reality by means of Microsoft Kinect, 2013

Riegamer, Leon Ricardo – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Technical and economic comparison of TIG hot filler wire welding with conventional TIG cold filler wire welding, 2013

Ripsch, Benjamin – Supervisor: M.Sc. M. Hauer
Economic and technical analysis of layers sprayed with cold gas, 2013

Rupprich, Sven – Dr.-Ing. habil. K.-M. Henkel
Load assumptions and strength verification for the development and certification of offshore wind energy units, 2013

Schröder, Felix – Supervisor: M.Sc. Wirt.-Ing. M. Eggert
Analysis and development of an algorithm for the job planning of a shipyard in the ship repair sector, 2013

Schornstein, Benjamin – Supervisor: Dipl.-Ing. M. Schumann
Selection, dimensioning and implementation of weight-optimized joining technologies for CFK bridgebuilding, 2013

Schubert, Jasmin – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Virtual safeguarding of an automated pipe node production unit for offshore structures by means of 3D simulation in Delmia, 2013

Schubert, Karl Friedrich – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Development of a mechanical seam forming environment in submerged arc transverse seam welding, 2013

Schuh, Cedric – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Conceptual approach to the design of assembly processes using resources efficiently, 2013

Schumacher, Steven – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Comparative investigation of TIG hot filler welding and MSG welding to reduce process times and improve economy, 2013

Seedorf, Erik – Supervisor: Dipl.-Ing. F. Beuß
Comparative analyses of optical measuring methods for use in the layout planning of factories, 2013

Seidler, Stephan – Supervisor: Dr.-Ing. U. Kothe
Application of FEM calculation methods for the heat expansion behaviour of metal plate, 2013

Singer, Danny – Supervisor: Dipl.-Ing. F. Beuß
Function analysis and evaluation of 3D exchange formats for product development, 2013

Sponholz, Hauke – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis and evaluation of design approaches for transformable factory structures in shipbuilding, 2013

Stawenow, Alexander – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Measurement of the preloading forces attained when using various tightening procedures, 2013

Treichel, Georg – Supervisor: Dipl.-Ing. (FH) M. Geist
Development of a tolerance concept for the production and assembly process for a sailing yacht, 2013

Wandsleb, Richard – Supervisor: M.Eng. L. Knaack
Animation of the astronomical clock of the St.-Marien church in Rostock, 2013

Wilhelmsen, Arne – Supervisor: M.Sc. Wirt.-Ing. K. Ehrich
Testing and optimisation of epoxy resin systems with weighted and unweighted fillers, 2013

Worm, Yves – Supervisor: Dipl.-Wirt. Ing. J. Sender
Time and cost calculations for manual panel assembly, 2013

Bartsch, Christoph – Supervisor: Dipl.-Ing. O. Grewe
Development of a process for quality assurance in the production of inlays for GFRP yacht hulls on the basis of laser scanning, 2012

Beese, Armin – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of test methods for determining mechanical surface characteristics at low temperatures, 2012

Brätz, Oliver – Supervisor: Dipl.-Ing. O. Grewe
Development of a process for quality assurance in the production of GFRP yacht hulls on the basis of laser scanning, 2012

Bredt, David – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development and commissioning of a test stand for determining diffusion properties of coating systems, 2012

Dietl, Thomas – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Tool management in production and assembly, 2012

Donst, Christoph – Supervisor: Dipl.-Ing. O.Wurst
Investigation of the economic advantages and disadvantages of electric motor-driven screw presses and hydropneumatic cylinder presses in automated assembly, 2012

Ehlers, Thomas – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the creep behaviour of epoxy resins with fillers, 2012

Forkel, Marcel – Supervisor: Dipl.-Ing. M. Wollenberg
Design study and preconstruction for range scaling of a large robot, 2012

Frank, Julius – Supervisor: Dipl.-Wirt. Ing. J. Sender
Elaboration of a concept for improving the calculation of planning times in special ship construction, taking the example of sectional construction, 2012

Grönda, Eric – Supervisor: Dipl.-Wirt. Ing. J. Sender
Simulation-based validation of the use of type representatives in the planning of the steel cutting, 2012

Hagen, Walter – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Assembly planning in series yachtbuilding, 2012

Hassel, Sven – Supervisor: M.Sc. Wirt. Ing. A. Ebert
Development of a suitable tool for semi-automatic setting of solid rivets in aluminium rivets, 2012

Heise, Henrik – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Simulation of the settling process of lock bolts with shear section, 2012

Herter, Nils – Supervisor: Dr.-Ing. A. Zych
Investigation of the use of ultrasonic testing technology for determining component faults in aluminium diecast parts, 2012

Holm, Ernst Ingmar – Supervisor: Dipl.-Wirt. Ing. C. Blunk
Development of suitable tools for semi-hollow punch riveting in CFRP materials, 2012

Illgen, Benjamin – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Tolerance management in production and assembly, 2012

Kluik, Steffen – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Determination of the vibration behaviour of a bolt test stand by experimental modal analysis, 2012

Krüger, Martin – Supervisor: Dr.-Ing. K.-M. Henkel
Analysis of a fibre laser welding process with respect to the influence of machine and parts on the quality of the welded joint in the industrial production of airbag gas generators, 2012

Kurdewan, Tom – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the bending behaviour of epoxy resins with fillers, 2012

Madau, Mario – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of a test method for determining the ice impact resistance of coating systems, 2012

Marx, Daniel Werner – Supervisor: Dipl.-Ing. C. Denkert
Installation and reference measurements of an optical measuring system, 2012

Meyer, Kristian – Supervisor: M.Sc. Wirt. Ing. A. Ebert
Development of a production concept for aluminium ring flanges, allowing for manufacturing tolerances, 2012

Meyer, Robert – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of algorithms for the processing of 3D sensor data fro the programming of robots and systems, 2012

Nieber, Markus – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Investigation of the use of 3D measuring sensors in automated production systems in practice, 2012

Niemann, Robert – Supervisor: M.Sc. Wirt. Ing. A. Gericke
Research into suitable sensor technologies for measuring the joint geometry in depth and width directions during electric arc welding and investigation of the suitability for electro-gas welding, 2012

Nowak, Karina – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the ageing behaviour of short fibre-reinforced epoxy resin, 2012

Oberpichler, Daniel – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Economic analysis and optimisation of the remachining process in solar module production, allowing for production organisational aspects, 2012

Papin, Julia – Supervisor: Dipl.-Ing. M. Schumann
Determination of dynamic indicators of the adhesion bond between steel and fibre-reinforced plastics, 2012

Rathert, Michael – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Determination of diffusion properties of coating systems and their influence on the corrosion protection properties, 2012

Renter, Tom – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Implementation of a measuring and control concept for an existing icing test stand using LabView, 2012

Rieck, Sebastian – Supervisor: Dipl.-Wirt. Ing. J. Sender
Optimised business processes in the engineering and procurement phase of carbody building lines in order to achieve a sustainably indexed assembly process, taking the example of AUDI AG, 2012

Riesebeck, Anne – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of the different variants in yachtbuilding and their effects on production and assembly, 2012

Rothe, Julia-Caroline – Supervisor: Dipl.-Ing. F. Beuß
Measurement of the energy consumption in factories, 2012

Rowolt, Christian – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Construction and commissioning of a dilatometer test stand, 2012

Schlesinger, Arne – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of localisation technologies for mobile use in factories, 2012

Schröder, Waldemar – Supervisor: Dipl.-Ing. C. Denkert
Identification of coefficients for the dimensioning of SL joints with lock bolts in FRP materials, 2012

Schümann, Marcus Hermann – Supervisor: Dr.-Ing. K.-M. Henkel
Investigation of the susceptibility to hardening of plate edges fused by plasma welding when using different cutting processes, 2012

Viebes, Jonas – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of approaches to stock optimisation for the retail trade, 2012

Wallis, Sven – Supervisor: Dipl.-Ing. R. Hein
Comparative study of the fatigue strength of MSG-soldered fillet joints of CuSi 3 and MSG-welded fillet joints, 2012

Weinrich, Christian – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Application and utilisation potential of X3D in factory planning, 2012

Winderlich, Adrian Paul – Supervisor: Dipl.-Ing. M. Schumann
Increasing the wear-resistance of fibre-reinforced plastics, 2012

Zeglat, Ulli – Supervisor: Dr.-Ing. V. Kabott
Design and construction of a test stand for a propeller direct drive, 2012

Albrecht, Christoph – Supervisor: Dipl.-Ing. S. Dryba
Development and design of a robot axis driven by a Watt's chain, 2011

Barth, Julia – Supervisor: Dipl.-Ing. O. Grewe
Development and creation of a test environment for the optimum testing of workpieces, 2011

Bayemiel, Oliver – Supervisor: Dipl.-Ing. M. Schumann
Determination of the material and structure damage to plastics due to processing and production, 2011

Becker, Malte – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Demand analysis for a wet cell module in yacht building, 2011

Blaschke, Marcus – Supervisor: Dipl.-Ing. N. Sendker
Investigation of the rigidity behaviour of GFRP bars with loop connection, 2011

Busch, Moritz – Supervisor: Dipl.-Ing. R. Glienke
Load-bearing behaviour of a lock bolt joint under shear loads, 2011

Da Cunha, Christoph – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Testing of possibilities for increasing the withstandable pretightening force and reduce the loss of pretightening force with GFRP, 2011

Dörfel, Eric – Supervisor: Dipl.-Ing. A. Schwaß
Development of an indicator system for evaluation of joining methods, 2011

Ehrich, Kirsten – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Investigations into assembly processes under Arctic conditions, 2011

Felgner, Susanne – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Reduced setup time – Enhanced flexibility thanks to single-minute exchange of die, 2011

Fencik, André – Supervisor: Dipl.-Ing. O. Herzig
Plant status evaluation and resulting maintenance strategies in pectin production, 2011

Fröck, Linda – Supervisor: Dipl.-Ing. N. Sendker
Determination of the mechanical properties of fibre rovings, 2011

Gebert, Michael – Supervisor: Dr.-Ing. U. Kothe
Possibilities of line heating as an alternative to cold forming, 2011

Gloede, Felix – Supervisor: Dipl.-Ing. O. Grewe
Planning of a quality assurance concept for the inline 3D testing of die-cast parts, 2011

Goerlitz, Hans – Supervisor: Dipl.-Ing. O. Grewe
Determination of suitable application configurations for a strip light projection method for process-integrated measurement operations, 2011

Goldmann, Florian – Supervisor: Dipl.-Ing. A. Dörge
Increasing ductility using alternating current during submerged-arc welding of fine-grain structural steel S690 QL 1, 2011

Grüning, Christian – Supervisor: Dipl.-Ing. O. Wurst
Development and production of an assembly device for rotary piston volumetric flowmeters, 2011

Grunwald, Morten – Supervisor: Dipl.-Ing. M. Schumann
Development of a process-capable production method for agitator propellers of fibre-reinforced plastics, 2011

Holm, Ingmar Ernst – Supervisor: Dipl.-Wirt. Ing. C. Blunk
Development of suitable tools for semi-hollow punch riveting in CFRP materials, 2011

Hoppe, Helge – Supervisor: Dipl.-Ing. R. Hein
Development of a guidance system for manual thermal edge rounding using plasma and TIG welding torches, 2011

Kindermann, Sven – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Material flow-oriented layout design in the bakery industry, 2011

Kranz, Nora – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Compensation of demand fluctuations by production levelling as part of lean production, 2011

Ladrik, Diana – Supervisor: Dipl.-Ing. (FH) M. Geist
Comparative precision investigation of 3D laser scanners using a large-surface test specimen, 2011

Langwasser, Martin – Supervisor: Dipl.-Ing. M. Schumann
Joint strength and corrosion properties of fibre-reinforced plastics and steel as material composites, 2011

Loui, Christiane – Supervisor: Dipl.-Ing. R. Hein
Determination of MSG root parameters for single-sided welded joints of additionally reinforced profile strips (PVPS) in flat shipbuilding structures, 2011

Marx, Daniel Werner – Supervisor: Dipl.-Ing. C. Denkert
Construction of a connector for a laser extensometer to the existing interface of a tensile testing machine, 2011

Möschner, Christine – Supervisor: Dipl.-Ing. O. Grewe
Digitisation and modelling of an historical movement of an astronomical clock, 2011

Paß, Sebastian – Supervisor: Dipl.-Ing. N. Glück
Use of Structural Glazing in Shipbuilding, 2011

Prust, Christoph – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of approaches for coupling material flow simulation and layout planning in the design of shipyards, 2011

Schmidt, Eik – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Development and implementation of a tool for virtual planning of the handling and positioning of large-volume steel structures, 2011

Schmidt, Stefan – Supervisor: Dipl.-Ing. A. Dörge
Development of a concept for determining the adhesion force of ice to surfaces, 2011

Schwarz, Mathias – Supervisor: Dipl.-Ing. C. Denkert
Determination of the relaxation of fibre composite materials under combined time, temperature and moisture loading, 2011

Schwarz, Matthias – Supervisor: Dipl.-Ing. R. Hein
Development and production of a suitable guidance system for a hand-held SAW head, 2011

Seide, Philipp – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the mechanical material properties of epoxy resin systems and fillers with and without ageing processes, 2011

Stein, Ole – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Value stream-oriented layout planning – The way to the lean factory layout, 2011

Steinert, Johannes – Supervisor: Dipl.-Ing. N. Glück
Investigation of the mechanical properties of different nodes in innovative fibre composite rod systems, 2011

Stiewe, Michael – Supervisor: Dipl.-Ing. O. Grewe
Construction of a 3D rotor blade model on the basis of measurement data, 2011

Witte, Johannes – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Investigation of corrosion properties of coating systems as a result of varying surface preparation methods, 2011

Wollmann, Marcel – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of a test stand for simulation of wave impact, 2011

Beu, Florian – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of an approach for the integration of qualitative ratios in panel line planning, taking the example of butt welding

Berndt, Tajo – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Analytical description and consideration of the load movement in oil and liquidgas tankers due to sea movement

Busch, Moritz – Supervisor: Dipl.-Ing. R. Glienke
Experimental development of the load-bearing strength of perforated panels in prestressed lock bolt joints in steel and aluminium materials

Dzabel, Stefan – Supervisor: Dipl.-Wirt. Ing. J. Sender
Ergonomic simulation of an assembly process for large apparatus

Finck, Matthias – Supervisor: Dr.-Ing. R. Czarnietzki
Analysis and evaluation of methods for operative employee deployment planning

Fischer, Martin – Supervisor: Dipl.-Ing. N. Sendker
Use of atmospheric pressure plasma for pretreatment of bonding surfaces

Giebel, Rico – Supervisor: Dipl.-Ing. N. Sendker
Use of bonded joints in the production of lightweight frames

Handtrag, Jennifer – Supervisor: Dr.-Ing. U. Kothe
Comparison and evaluation of the use of heavy goods transport systems in shipyards

Hecht, Martin – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a method for testing 3D laser scanners in a virtual CAD environment for complex object structures

Herold, Max – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a ratio system for the evaluation of energy-efficient common assembly processes

Henning, Lars – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Construction and testing of a measuring stand for conducting flow rate measurements in pulsed metering processes

Jagusch, Konrad – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a concept for an MES system in manufacturing SMEs

Kempa, Christoph – Supervisor: Dipl.-Ing. R. Bohnenberg
Examination and evaluation of different methods for cooling diecasting moulds

Kollhoff, Edwin – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Comparison of destructive testing methods for determining the  bearing strength characteristics of mechanical joining methods

Maaß, Benita – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Construction of a measuring stand for performing acoustic tests in the laboratory

Manske, Justus – Supervisor: Dipl.-Ing. O. Grewe
Development of a test method for the Mensi GS 100 laser scanner

Mischorr, Sascha – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of calculation data for individual components in steel structures allowing for the later installation position in the ship

Nehls, Thomas – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Development of a measuring stand for determining clamping forces of mechanical joints

Pflugradt, Leo – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis and evaluation of statistical methods for planning of panel lines

Richter, Erik – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of construction guidelines for different ship types with respect to their influence on the production process

Schuldt, Thomas – Supervisor: Dipl.- Ing. P. Simon
Drafting of a concept for hardware linking of the components of an image processing system for automatic machining of metal edges

Schullig, Stefan – Supervisor: Dr.-Ing. K.-M. Henkel
Investigations of substance-to-substance joints by bonding and welding with "Mineralit" polymer concrete

Schröder, Michael – Supervisor: Dipl.-Ing. R. Hein
Determination of the production costs for the installation of additionally reinforced profile strips (PVPS) in flat shipbuilding structures

Schwarz, Christian – Supervisor: Dipl.-Wirt. Ing. S. Heinrich
Quality assurance on the assembly of bonded solar modules

Steinhöfel, Christian – Supervisor: Dipl.-Wirt. Ing. H. Kuehl
Experimental determination of fatigue strength of centrically axially loaded lock bolt and blind rivet joints and their classification under the Eurocode 3

Triebel, Tom – Supervisor: Dr.-Ing. U. Kothe
Benefits of benchmarking analyses in maritime production

Vajen, Hermann – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Development of a manufacturing layout for CNG tank modules on the basis of pressurised tubes

Dietrich, Peter – Supervisor: Dipl.-Ing. R. Bohnenberg
Developing and Systematization of Required Manufacturing Data for Work Preparation

Ebert, Andreas – Supervisor: Dipl.-Ing. M. Anders
Literature Research in Regard to UP Welding of High-Strength Quenched and Tempered Steels in the Plate Thickness Range of 20-100 mm

Ehrich, Kai – Supervisor: Dipl.-Ing. N. Sendker
Mechanical Testing of a Structural GRP-Adhesive Joint

Freund, Hannes – Supervisor: Dipl.-Ing. N. Sendker
Mechanical Testing of GRP-Winded Bar Structures

Hammerschmidt, Jan – Supervisor: Dipl.-Wirt. Ing. S. Heinrich
Development of an Integration Conception for the Dimensional Inspection in the Production Process of Extensive Aluminum Panels

Jandt, Martin – Supervisor: Dr.-Ing. R. Krause
Analysis and Evaluation of Welding Procedures for Aluminum in Regard to Shipbuilding Manufacturing

Klopsch, Vincent – Supervisor: Dipl.-Ing. (FH) U. Pfletscher
Conception for an Automatic Sorting and Separation Plant in Plate Cutting Based on a Catalog of Requirements and the State of the Art

Kraus, Oliver – Supervisor: Dipl.-Wirt. Ing. J. Sender
Contrasting Evaluation Methods for Production Layouts

Lerche, Alexander – Supervisor: Dipl.-Ing. R. Bohnenberg
Systematization of Information in CAD-Systems for Production Planning

Reiche, Claudia – Supervisor: Dipl.-Wirt. Ing. J. Sender
Comparison of Methods for the Determination of the Optimal Arrangement of Working Places

Röhrich, Vivien – Supervisor: Dipl.-Ing. R. Bohnenberg
Analysis of Energetic Saving Potentials in Steel Body Assembly

Schmalenberg, Jörg – Supervisor: Dipl.-Ing. A. Dörge
Application of Ceramic Backing in Large Section Assembly in Shipbuilding

Sülflow, Benjamin – Supervisor: Dr.-Ing. R. Czarnietzki
Evaluation of Strategies for Resource Reservation According to the Principle of the Earliest or Latest Possible Order Release Date

Weber, Steffi – Supervisor: Dipl.-Ing. R. Bohnenberg
Analysis of Potential Organization Variants of the Internal Transport between Different Organization Forms

Bachelor Papers 2015

Course of study Bachelor in Machine Construction

Ahrndt, Johannes – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Simulation-based track planning for a welding application for the joining of pipe nodes with a redundant manipulator application, 2015

Boyens, Oliver – Supervisor: M.Sc. K. Jagusch
Development of a system to control a driverless transport system, 2015

Gatzke, Johannes – Supervisor: Dipl.-Ing. A. Harmel
Construction and evaluation of a mechanism for the simultaneous adjustment of the variable length between two coupling rods running in parallel, 2015

Haß, Annika – Supervisor: Dipl.-Ing. N. Glück
Experimental investigation of force application elements for composite structures

Heide, Dennis – Supervisor: Dr. rer. pol. A.-K. Schröder
Optimisation of the collaboration between the plant logistics and the logistics of the technical development section in the VW plant in Osnabrück, 2015

Herold, Arne – Supervisor: Dr.-Ing. N. Fuchs
Optimisation of a holder system for the 3D laser cutting of deep-drawn sheets, 2015

Jericho, David – Supervisor: M.Sc. K. Jagusch
Development of a control concept for an intelligent working table based on non-contact data collection, 2015

Kibellus, Tom – Supervisor: M.Sc. L. Fröck
Investigation of the influence of liquids on adhesives, 2015

Kruschinski, Felix – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Investigation of complex electrochemical and thermochemical reactions in submerged arc welding with various material combinations, 2015

Nickel, Paul –  Supervisor: Dr.-Ing. N. Fuchs
Development of a die concept for the formed joining of of plate of greater thicknesses

Prochnow, Oliver – Supervisor: Dr. rer. pol. A.-K. Schröder
Comparison and interface examination of the of functional safety in the machine and process industry, 2015

Schramm, Nils – Supervisor: Dipl.-Ing. N. Glück
Development of a methodology for the selection and design of clamping technology for RIM shaping dies, 2015

Voß, Paul – Supervisor: M.Sc. S. Lauer
Development and design of a lightweight robot arm with an axial connection for a load of 250 kg, 2015

Yang, Fan – Supervisor: Dipl.-Wirt. Ing K. Ehrich
Determination of the properties of adhesives that do not burn / are only sparingly inflammable for industrial use, 2015

Course of study Bachelor in Business Engineering

Baumgart, Luciano – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis and development of propeller class-specific strategies for the automated drilling of ship propellers with the aid of 3D robot simulation, 2015

Bludau, Danny – Supervisor: Dr. rer. pol. A.-K. Schröder
Analysis and evaluation of algorithms in machine capacity planning, 2015

Brandenburg, Kay – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Cinematographic and thermal process investigation when welding with the targeted application of vibration into the fusion bath and derivation of production management effects, 2015

Franz, Jan-Eric – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Perspectives of additive manufacturing procedures with special consideration of arc welding and economic points of view, 2015

Ganschow, Jörg – Supervisor: Dr. rer. pol. A.-K. Schröder
Analysis of options for the collection of hazardous substance-specific information within the scope of the IMO guideline for ship recycling, 2015

Girbardt, Leonie – Supervisor: M.Sc. Wirt.-Ing. A. Gericke
Technological and economic investigation of slag recycling in submerged arc welding, 2015

Götting, Sören – Supervisor: Dr. rer. pol. A.-K. Schröder
Requirements in shipyards when drawing up a register of hazardous substances - An analysis in connection with the IMO guideline for ship recycling, 2015

Heise, Susanne – Supervisor: M.Sc. Wirt.-Ing. M. Eggert
Optimisation of an application for the collection of operating data for touch-controlled non-portable devices, 2015

Hollmann, Matthes – Supervisor: M.Sc. K. Jagusch
Development of an innovative operating concept for virtual installation manuals, 2015

Maaß, Nicholas – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis, evaluation and selection of localisation systems and strategies for the storage of large steel parts in the indoor and outdoor area with the aim of planning the storage capacity, 2015

Nielson, Esko – Supervisor: Dr. rer. pol. A.-K. Schröder
Industry 4.0 - Analysis of the requirements for Quality Management, 2015

Prause, Christoph – Supervisor: Dipl.-Wirt. Ing J. Sender
Conceptual design of versatile production layouts in shipbuilding, 2015

Redemund, Klaus – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis and experimental implementation of the automated handling of parts placed in no particular order - at random, 2015

Schmatz, Frederik – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Conceptual design and implementation of a software-based resources capacity and allocation system for the mechanical test laboratory at Fraunhofer AGP Rostock, 2015

Soehring, Philipp – Supervisor: Dipl.-Wirt. Ing J. Sender
Simulation-based optimisation of shipyards, 2015

Stegmann, Lennart – Supervisor: M.Sc. R. Staschko
Investigations of the influence of the settling process steps on the delamination of punch-riveted composite fibre parts, 2015

Wirths, Wim – Supervisor: M.Sc. P. Froitzheim
Investigation of ultrasound-based punch-riveting for sheet, plate and CFRP joints, 2015

Bachelor Papers 2014

Study course Bachelor Mechanical Engineering

Gericke, Horst – Supervisor: Dipl.-Eng. Robert Hein
Influence of ferric-aluminium-boric-alloys on mechanical-technologic characteristics of CuSi3-dissolved joints, 2014

Heyn, Amadeus Bogomil – Supervisor: Dipl.-Econ. Eng. J. Sender
Analysis of wireless communication concepts of driverless transport systems within production, 2014

Holleitner, Felix – Supervisor: M.Sc. T. Nehls
Material parameter detection for numeric simulation on real units, 2014

Humpert, Daniel – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Analysis of frequency-dependent heat-generation within dynamic inspection of fibre-reinforced synthetics, 2014

Jandejsek, Daniel – Supervisor: Dipl.-Eng. N. Glück
Verification of the interchanging stability of reinforced loop connections within unit trials, 2014

Kappel, Oliver – Supervisor: Dipl.-Eng. F. Heßeln
Experimental analysis of adhensive attrition at clinching with ultrasonic assistance, 2014

Kappis, Lukas Vincent – Supervisor: M.Sc. S. Schmidt
Experimental testing of methods producing rotor blades of small wind energy plants, 2014

Knöchelmann, Florian – Supervisor: Dipl.-Eng. C. Denkert
Segmentation of CAD models to use mapping methods, 2014

Komorowski, Alex David – Supervisor: M.Sc. L. Fröck
Development and testing of devices cutting fibre-reinforced rods to length, 2014

König, Moritz – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Selection and qualification of a MS polymer sealant, 2014

Kureck, Tom – Supervisor: M.Sc. Wirt-Eng. Andreas Gericke
Analysis of a combined influence of VWC on internal stress and mechanical-technological characteristics of submerged arc welded joints, 2014

Leingang, Daniel – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Analysis of the shear strengh of fibreglass-reinforced epoxy resins in use for support material, 2014

Lindloff-Rühse, Jens – Supervisor: M.Sc. L. Fröck
Testing the adherence of pipe sleeves under climate changing conditions, 2014

Loske, Cora – Supervisor: Dipl.-Econ. Eng. J. Meißner
Integration of an optical 3D measuring sensor within the simulation Delmia V5, 2014

Malagic, Malik – Supervisor: Dipl.-Econ. Eng. N. Fuchs
Analysing solid cut rivets of mixed joints from aluminium and composite fibre material with different rivet geometrics, 2014

Möller, Katharina – Supervisor: M.Sc. Econ.-Eng. K. Ehrich
Procedual analysis in production of polyamide made from monomers, 2014

Pechmann, Alberecht – Supervisor: M.Sc. S. Schmidt
Analysis of potentials reducing weight of a commercial flexible arm robot, 2014

Perlick, Toni – Supervisor: M.Sc. K. Jagusch
Development of a data recording system using process visualization via 3D mounting instructions, 2014

Rami, Abou Said – Supervisor: Dr.-Eng. U. Kothe
Development of a system comparing parametres within productivity (benchmarking) in ship repair, 2014

Sachse, Till – Supervisor: M.Sc. K. Jagusch
Development of a controlling concept at 'the intelligent workingplace', 2014

Schröder, Ingomar – Supervisor: M.Sc. S. Schmidt
Development of a concept connecting a CFR robot arm, 2014

Serduk, Roman – Supervisor: Dipl.-Eng. A. Kacaras
Procedural analysis of polymer production from monomers, 2014

Streckfuß, Ulrich – Supervisor: Dr.-Eng. U. Kothe
Approaching the evaluation of manufacturing system's energy flexibility, 2014

Wegner, Hendrik – Supervisor: M.Sc. K. Jagusch
Development of a quality management system within manual mounting with the help of optical systems, 2014

Werner, Hannes – Supervisor: Dipl.-Eng. A. Harmel
Interpretation of a screw circle according to VDI2230 in comparison with an FE simulation, 2014

Zech, Aenne – Supervisor: Dr.-Eng. U. Kothe
Properties of maritime vessels in shallow, icegoing water and resulting characteristics within ship body construction, 2014

Zickermann, Mirco – Supervisor: M.Sc. Econ.-Eng. A. Ebert
Influence of punched and drilled holes on fatigue stability of hot-galvanized non-slip connections, 2014

Study course Bachelor Economic Engineering

Baudisch, Martin – Supervisor: M.Sc. T. Nehls
Analysis of irregularities at the setting process of a selected lockbolt system, 2014

Becker, Alexander – Supervisor: Dipl.-Econ. Eng. J. Meißner
Process analysis and construction of the montage of selected building units considering ergonomic, economic and technological aspects, 2014

Bolsmann, Alexander – Supervisor: M.Sc. K. Jagusch
Conceptualization of a driving unit for working tables for the manual montage of large units, 2014

Gerhards, Alexander – Supervisor: Dipl.-Econ. Eng. J. Sender
Detection of a productivity index within panel production, 2014

Haaker, Insa – Supervisor: M.Sc. Wirt-Eng. Andreas Gericke
Market analysis and trend reports developing de facto heat-resistant jointing and separating methods, 2014

Junge, Susann – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and systematization according to recent security technologies within human-robot-interaction in use for mobile robots
, 2014

Lehmann, Nick – Supervisor: Dipl.-Eng. F. Beuß
Analysing the profitability of human-robot-collaboration within mounting processes, 2014

Lück, Thomas – Supervisor: Dr. rer. pol. A.- K. Schröder
Analysis and rationalization of an energy-oriented configuration planning, 2014

Portwich, Paul – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and evaluation of the indoor tracking system Ubisense RTLS, 2014

Prior, Ninja – Supervisor: Dipl.-Econ. Eng. J. Meißner
Systematization of industrial, optical 3D measuring sensors for developing a sensor library in the context of virtual 3D sensor protection, 2014

Scheidt, Maximilian – Supervisor:  M.Sc. C. Klötzer
Development of a flexible span and guiding device for areal grinding of welded ferric sections unto 600mm length to be based on pre-selected mobile grinding units, 2014

Somodi, Robert – Supervisor: Dipl.-Eng. F. Beuß
Technical interpretation of fixing slots used for racks in the field of large structures, 2014

Theiß, Romy – Supervisor: Dipl.-Econ. Eng. J. Meißner
Analysis and systematization according to recent security technologies within human-robot-interaction in use for stationary robots, 2014

Wagner, Felix – Supervisor: M.Sc. Econ.-Eng. M. Eggert
Multiple machine operation within plant simulation, 2014

Winkels, Denise – Supervisor: Dipl.-Econ. Eng. J. Meißner
Classification of modular service contracts for electric engines and converters used by Siemens AG in the field of product live management as well as developing a training concept to be used by the sales staff, 2014

Witting, Sergej – Supervisor: Dipl.-Econ. Eng. J. Meißner
Simulation assisted offline programming of a UR10 light weight robot to be used at ship bodies, 2014

Zickermann, Mirco – Supervisor: M.Sc. Econ.-Eng. A. Ebert

Influence of punched and drilled holes on fatigue stability of slip-resistant joints wit, 2014

 

Bachelor Papers 2013

Blumöhr, Torben – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a method for the selection of transport systems in shipyard planning, 2013

Dietrich, Christian – Supervisor: Dipl.-Ing. F. Beuß
Technical design of a heavy load link apron cover for use in work piece holders in the area of large structures, 2013

Dubberke, Lisa – Supervisor: Dipl.-Ing. F. Beuß
Virtual ergonomic analysis with regard to economic aspects, 2013

Dörre, Maik – Supervisor: Dipl.-Ing. C. Denkert
Investigation of function element screw fittings within the meaning of Directive VDI 2230, 2013

Fischer, Markus – Supervisor: Dipl.-Wirt. Ing. J. Sender
Capacity and layout planning taking the construction of container ships as an example, 2013

Grapp, Daniel – Supervisor: Dipl.-Ing. F. Beuß
Concept development for the combination of virtual investigations and CAD software, 2013

Hempel, Florian – Supervisor: M.Sc. K. Jagusch
Development of a train shuttle concept between the train formation depot Maschen and the Hamburg harbour (Waltershof) with regard to economic and qualitative aspects, 2013

Hochfeld, Christopher – Dr.-Ing. habil. K.-M. Henkel
Design and construction of welded connections in high-strength load-bearing structures in offshore wind energy units, 2013

Katzer, Tom – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis, optimisation and establishment of a process for the preparation and servicing of drills in the assembly of the structure for the A350XWB, 2013

Kelling, Robert – Supervisor: Dipl.-Ing. R. Glienke
Experimental investigations of the characterisation of the load-bearing characteristics of preloaded hybrid joints, 2013

Klink, Steffen – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Determination of the vibration behaviour of a screw test stand through experimental modal analysis, 2013

Krohn, Matti – Supervisor: Dr.-Ing. habil. K.-M. Henkel
Investigation of laser beam-welded T-joints on the S355, 2013

Krüger, Torsten – Supervisor: Dipl.-Ing. R. Glienke
Development of a construction suitable for screw connection for vehicle superstructures on the basis of welded constructions, 2013

Mönning, Peter – Supervisor: Dipl.-Ing. A. Kacaras
Controller implementation of the "cross-winding" winding pattern in the laboratory winding unit, 2013

Nitschke, Tony – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Characterisation of the joints of lattice tower structures for wind energy units regarding their static and dynamic properties, 2013

Pauluhn, Eik – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of the work times of assembly processes for a special ship, 2013

Perschnick, Bertram – Supervisor: Dipl.-Ing. F. Beuß
Markerless tracking of gestures in virtual reality by means of Microsoft Kinect, 2013

Riegamer, Leon Ricardo – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Technical and economic comparison of TIG hot filler wire welding with conventional TIG cold filler wire welding, 2013

Ripsch, Benjamin – Supervisor: M.Sc. M. Hauer
Economic and technical analysis of layers sprayed with cold gas, 2013

Rupprich, Sven – Dr.-Ing. habil. K.-M. Henkel
Load assumptions and strength verification for the development and certification of offshore wind energy units, 2013

Schröder, Felix – Supervisor: M.Sc. Wirt.-Ing. M. Eggert
Analysis and development of an algorithm for the job planning of a shipyard in the ship repair sector, 2013

Schornstein, Benjamin – Supervisor: Dipl.-Ing. M. Schumann
Selection, dimensioning and implementation of weight-optimized joining technologies for CFK bridgebuilding, 2013

Schubert, Jasmin – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Virtual safeguarding of an automated pipe node production unit for offshore structures by means of 3D simulation in Delmia, 2013

Schubert, Karl Friedrich – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Development of a mechanical seam forming environment in submerged arc transverse seam welding, 2013

Schuh, Cedric – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Conceptual approach to the design of assembly processes using resources efficiently, 2013

Schumacher, Steven – Supervisor: M.Sc. Wirt-Ing. A. Gericke
Comparative investigation of TIG hot filler welding and MSG welding to reduce process times and improve economy, 2013

Seedorf, Erik – Supervisor: Dipl.-Ing. F. Beuß
Comparative analyses of optical measuring methods for use in the layout planning of factories, 2013

Seidler, Stephan – Supervisor: Dr.-Ing. U. Kothe
Application of FEM calculation methods for the heat expansion behaviour of metal plate, 2013

Singer, Danny – Supervisor: Dipl.-Ing. F. Beuß
Function analysis and evaluation of 3D exchange formats for product development, 2013

Sponholz, Hauke – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis and evaluation of design approaches for transformable factory structures in shipbuilding, 2013

Stawenow, Alexander – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Measurement of the preloading forces attained when using various tightening procedures, 2013

Treichel, Georg – Supervisor: Dipl.-Ing. (FH) M. Geist
Development of a tolerance concept for the production and assembly process for a sailing yacht, 2013

Wandsleb, Richard – Supervisor: M.Eng. L. Knaack
Animation of the astronomical clock of the St.-Marien church in Rostock, 2013

Wilhelmsen, Arne – Supervisor: M.Sc. Wirt.-Ing. K. Ehrich
Testing and optimisation of epoxy resin systems with weighted and unweighted fillers, 2013

Worm, Yves – Supervisor: Dipl.-Wirt. Ing. J. Sender
Time and cost calculations for manual panel assembly, 2013

Bachelor Papers 2012

Bartsch, Christoph – Supervisor: Dipl.-Ing. O. Grewe
Development of a process for quality assurance in the production of inlays for GFRP yacht hulls on the basis of laser scanning, 2012

Beese, Armin – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of test methods for determining mechanical surface characteristics at low temperatures, 2012

Brätz, Oliver – Supervisor: Dipl.-Ing. O. Grewe
Development of a process for quality assurance in the production of GFRP yacht hulls on the basis of laser scanning, 2012

Bredt, David – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development and commissioning of a test stand for determining diffusion properties of coating systems, 2012

Dietl, Thomas – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Tool management in production and assembly, 2012

Donst, Christoph – Supervisor: Dipl.-Ing. O.Wurst
Investigation of the economic advantages and disadvantages of electric motor-driven screw presses and hydropneumatic cylinder presses in automated assembly, 2012

Ehlers, Thomas – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the creep behaviour of epoxy resins with fillers, 2012

Forkel, Marcel – Supervisor: Dipl.-Ing. M. Wollenberg
Design study and preconstruction for range scaling of a large robot, 2012

Frank, Julius – Supervisor: Dipl.-Wirt. Ing. J. Sender
Elaboration of a concept for improving the calculation of planning times in special ship construction, taking the example of sectional construction, 2012

Grönda, Eric – Supervisor: Dipl.-Wirt. Ing. J. Sender
Simulation-based validation of the use of type representatives in the planning of the steel cutting, 2012

Hagen, Walter – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Assembly planning in series yachtbuilding, 2012

Hassel, Sven – Supervisor: M.Sc. Wirt. Ing. A. Ebert
Development of a suitable tool for semi-automatic setting of solid rivets in aluminium rivets, 2012

Heise, Henrik – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Simulation of the settling process of lock bolts with shear section, 2012

Herter, Nils – Supervisor: Dr.-Ing. A. Zych
Investigation of the use of ultrasonic testing technology for determining component faults in aluminium diecast parts, 2012

Holm, Ernst Ingmar – Supervisor: Dipl.-Wirt. Ing. C. Blunk
Development of suitable tools for semi-hollow punch riveting in CFRP materials, 2012

Illgen, Benjamin – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Tolerance management in production and assembly, 2012

Kluik, Steffen – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Determination of the vibration behaviour of a bolt test stand by experimental modal analysis, 2012

Krüger, Martin – Supervisor: Dr.-Ing. K.-M. Henkel
Analysis of a fibre laser welding process with respect to the influence of machine and parts on the quality of the welded joint in the industrial production of airbag gas generators, 2012

Kurdewan, Tom – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the bending behaviour of epoxy resins with fillers, 2012

Madau, Mario – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of a test method for determining the ice impact resistance of coating systems, 2012

Marx, Daniel Werner – Supervisor: Dipl.-Ing. C. Denkert
Installation and reference measurements of an optical measuring system, 2012

Meyer, Kristian – Supervisor: M.Sc. Wirt. Ing. A. Ebert
Development of a production concept for aluminium ring flanges, allowing for manufacturing tolerances, 2012

Meyer, Robert – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of algorithms for the processing of 3D sensor data fro the programming of robots and systems, 2012

Nieber, Markus – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Investigation of the use of 3D measuring sensors in automated production systems in practice, 2012

Niemann, Robert – Supervisor: M.Sc. Wirt. Ing. A. Gericke
Research into suitable sensor technologies for measuring the joint geometry in depth and width directions during electric arc welding and investigation of the suitability for electro-gas welding, 2012

Nowak, Karina – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the ageing behaviour of short fibre-reinforced epoxy resin, 2012

Oberpichler, Daniel – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Economic analysis and optimisation of the remachining process in solar module production, allowing for production organisational aspects, 2012

Papin, Julia – Supervisor: Dipl.-Ing. M. Schumann
Determination of dynamic indicators of the adhesion bond between steel and fibre-reinforced plastics, 2012

Rathert, Michael – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Determination of diffusion properties of coating systems and their influence on the corrosion protection properties, 2012

Renter, Tom – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Implementation of a measuring and control concept for an existing icing test stand using LabView, 2012

Rieck, Sebastian – Supervisor: Dipl.-Wirt. Ing. J. Sender
Optimised business processes in the engineering and procurement phase of carbody building lines in order to achieve a sustainably indexed assembly process, taking the example of AUDI AG, 2012

Riesebeck, Anne – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of the different variants in yachtbuilding and their effects on production and assembly, 2012

Rothe, Julia-Caroline – Supervisor: Dipl.-Ing. F. Beuß
Measurement of the energy consumption in factories, 2012

Rowolt, Christian – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Construction and commissioning of a dilatometer test stand, 2012

Schlesinger, Arne – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Analysis of localisation technologies for mobile use in factories, 2012

Schröder, Waldemar – Supervisor: Dipl.-Ing. C. Denkert
Identification of coefficients for the dimensioning of SL joints with lock bolts in FRP materials, 2012

Schümann, Marcus Hermann – Supervisor: Dr.-Ing. K.-M. Henkel
Investigation of the susceptibility to hardening of plate edges fused by plasma welding when using different cutting processes, 2012

Viebes, Jonas – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of approaches to stock optimisation for the retail trade, 2012

Wallis, Sven – Supervisor: Dipl.-Ing. R. Hein
Comparative study of the fatigue strength of MSG-soldered fillet joints of CuSi 3 and MSG-welded fillet joints, 2012

Weinrich, Christian – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Application and utilisation potential of X3D in factory planning, 2012

Winderlich, Adrian Paul – Supervisor: Dipl.-Ing. M. Schumann
Increasing the wear-resistance of fibre-reinforced plastics, 2012

Zeglat, Ulli – Supervisor: Dr.-Ing. V. Kabott
Design and construction of a test stand for a propeller direct drive, 2012

Bachelor Papers 2011

Albrecht, Christoph – Supervisor: Dipl.-Ing. S. Dryba
Development and design of a robot axis driven by a Watt's chain, 2011

Barth, Julia – Supervisor: Dipl.-Ing. O. Grewe
Development and creation of a test environment for the optimum testing of workpieces, 2011

Bayemiel, Oliver – Supervisor: Dipl.-Ing. M. Schumann
Determination of the material and structure damage to plastics due to processing and production, 2011

Becker, Malte – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Demand analysis for a wet cell module in yacht building, 2011

Blaschke, Marcus – Supervisor: Dipl.-Ing. N. Sendker
Investigation of the rigidity behaviour of GFRP bars with loop connection, 2011

Busch, Moritz – Supervisor: Dipl.-Ing. R. Glienke
Load-bearing behaviour of a lock bolt joint under shear loads, 2011

Da Cunha, Christoph – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Testing of possibilities for increasing the withstandable pretightening force and reduce the loss of pretightening force with GFRP, 2011

Dörfel, Eric – Supervisor: Dipl.-Ing. A. Schwaß
Development of an indicator system for evaluation of joining methods, 2011

Ehrich, Kirsten – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Investigations into assembly processes under Arctic conditions, 2011

Felgner, Susanne – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Reduced setup time Enhanced flexibility thanks to single-minute exchange of die, 2011

Fencik, André – Supervisor: Dipl.-Ing. O. Herzig
Plant status evaluation and resulting maintenance strategies in pectin production, 2011

Fröck, Linda – Supervisor: Dipl.-Ing. N. Sendker
Determination of the mechanical properties of fibre rovings, 2011

Gebert, Michael – Supervisor: Dr.-Ing. U. Kothe
Possibilities of line heating as an alternative to cold forming, 2011

Gloede, Felix – Supervisor: Dipl.-Ing. O. Grewe
Planning of a quality assurance concept for the inline 3D testing of die-cast parts, 2011

Goerlitz, Hans – Supervisor: Dipl.-Ing. O. Grewe
Determination of suitable application configurations for a strip light projection method for process-integrated measurement operations, 2011

Goldmann, Florian – Supervisor: Dipl.-Ing. A. Dörge
Increasing ductility using alternating current during submerged-arc welding of fine-grain structural steel S690 QL 1, 2011

Grüning, Christian – Supervisor: Dipl.-Ing. O. Wurst
Development and production of an assembly device for rotary piston volumetric flowmeters, 2011

Grunwald, Morten – Supervisor: Dipl.-Ing. M. Schumann
Development of a process-capable production method for agitator propellers of fibre-reinforced plastics, 2011

Holm, Ingmar Ernst – Supervisor: Dipl.-Wirt. Ing. C. Blunk
Development of suitable tools for semi-hollow punch riveting in CFRP materials, 2011

Hoppe, Helge – Supervisor: Dipl.-Ing. R. Hein
Development of a guidance system for manual thermal edge rounding using plasma and TIG welding torches, 2011

Kindermann, Sven – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Material flow-oriented layout design in the bakery industry, 2011

Kranz, Nora – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Compensation of demand fluctuations by production levelling as part of lean production, 2011

Ladrik, Diana – Supervisor: Dipl.-Ing. (FH) M. Geist
Comparative precision investigation of 3D laser scanners using a large-surface test specimen, 2011

Langwasser, Martin – Supervisor: Dipl.-Ing. M. Schumann
Joint strength and corrosion properties of fibre-reinforced plastics and steel as material composites, 2011

Loui, Christiane – Supervisor: Dipl.-Ing. R. Hein
Determination of MSG root parameters for single-sided welded joints of additionally reinforced profile strips (PVPS) in flat shipbuilding structures, 2011

Marx, Daniel Werner – Supervisor: Dipl.-Ing. C. Denkert
Construction of a connector for a laser extensometer to the existing interface of a tensile testing machine, 2011

Möschner, Christine – Supervisor: Dipl.-Ing. O. Grewe
Digitisation and modelling of an historical movement of an astronomical clock, 2011

Paß, Sebastian – Supervisor: Dipl.-Ing. N. Glück
Use of Structural Glazing in Shipbuilding, 2011

Prust, Christoph – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of approaches for coupling material flow simulation and layout planning in the design of shipyards, 2011

Schmidt, Eik – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Development and implementation of a tool for virtual planning of the handling and positioning of large-volume steel structures, 2011

Schmidt, Stefan – Supervisor: Dipl.-Ing. A. Dörge
Development of a concept for determining the adhesion force of ice to surfaces, 2011

Schwarz, Mathias – Supervisor: Dipl.-Ing. C. Denkert
Determination of the relaxation of fibre composite materials under combined time, temperature and moisture loading, 2011

Schwarz, Matthias – Supervisor: Dipl.-Ing. R. Hein
Development and production of a suitable guidance system for a hand-held SAW head, 2011

Seide, Philipp – Supervisor: M.Sc. Wirt. Ing. K. Ehrich
Investigation of the mechanical material properties of epoxy resin systems and fillers with and without ageing processes, 2011

Stein, Ole – Supervisor: Dipl.-Wirt. Ing. O. Herzig
Value stream-oriented layout planning The way to the lean factory layout, 2011

Steinert, Johannes – Supervisor: Dipl.-Ing. N. Glück
Investigation of the mechanical properties of different nodes in innovative fibre composite rod systems, 2011

Stiewe, Michael – Supervisor: Dipl.-Ing. O. Grewe
Construction of a 3D rotor blade model on the basis of measurement data, 2011

Witte, Johannes – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Investigation of corrosion properties of coating systems as a result of varying surface preparation methods, 2011

Wollmann, Marcel – Supervisor: Dipl.-Wirt. Ing. M. Irmer
Development of a test stand for simulation of wave impact, 2011

 

Bachelorthesis 2010

 

Beu, Florian – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of an approach for the integration of qualitative ratios in panel line planning, taking the example of butt welding

Berndt, Tajo – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Analytical description and consideration of the load movement in oil and liquidgas tankers due to sea movement

Busch, Moritz – Supervisor: Dipl.-Ing. R. Glienke
Experimental development of the load-bearing strength of perforated panels in prestressed lock bolt joints in steel and aluminium materials

Dzabel, Stefan – Supervisor: Dipl.-Wirt. Ing. J. Sender
Ergonomic simulation of an assembly process for large apparatus

Finck, Matthias – Supervisor: Dr.-Ing. R. Czarnietzki
Analysis and evaluation of methods for operative employee deployment planning

Fischer, Martin – Supervisor: Dipl.-Ing. N. Sendker
Use of atmospheric pressure plasma for pretreatment of bonding surfaces

Giebel, Rico – Supervisor: Dipl.-Ing. N. Sendker
Use of bonded joints in the production of lightweight frames

Handtrag, Jennifer – Supervisor: Dr.-Ing. U. Kothe
Comparison and evaluation of the use of heavy goods transport systems in shipyards

Hecht, Martin – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a method for testing 3D laser scanners in a virtual CAD environment for complex object structures

Herold, Max – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a ratio system for the evaluation of energy-efficient common assembly processes

Henning, Lars – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Construction and testing of a measuring stand for conducting flow rate measurements in pulsed metering processes

Jagusch, Konrad – Supervisor: Dipl.-Wirt. Ing. J. Sender
Development of a concept for an MES system in manufacturing SMEs

Kempa, Christoph – Supervisor: Dipl.-Ing. R. Bohnenberg
Examination and evaluation of different methods for cooling diecasting moulds

Kollhoff, Edwin – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Comparison of destructive testing methods for determining the  bearing strength characteristics of mechanical joining methods

Maaß, Benita – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Construction of a measuring stand for performing acoustic tests in the laboratory

Manske, Justus – Supervisor: Dipl.-Ing. O. Grewe
Development of a test method for the Mensi GS 100 laser scanner

Mischorr, Sascha – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of calculation data for individual components in steel structures allowing for the later installation position in the ship

Nehls, Thomas – Supervisor: Dipl.-Wirt. Ing. N. Fuchs
Development of a measuring stand for determining clamping forces of mechanical joints

Pflugradt, Leo – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis and evaluation of statistical methods for planning of panel lines

Richter, Erik – Supervisor: Dipl.-Wirt. Ing. J. Sender
Analysis of construction guidelines for different ship types with respect to their influence on the production process

Schuldt, Thomas – Supervisor: Dipl.- Ing. P. Simon
Drafting of a concept for hardware linking of the components of an image processing system for automatic machining of metal edges

Schullig, Stefan – Supervisor: Dr.-Ing. K.-M. Henkel
Investigations of substance-to-substance joints by bonding and welding with "Mineralit" polymer concrete

Schröder, Michael – Supervisor: Dipl.-Ing. R. Hein
Determination of the production costs for the installation of additionally reinforced profile strips (PVPS) in flat shipbuilding structures

Schwarz, Christian – Supervisor: Dipl.-Wirt. Ing. S. Heinrich
Quality assurance on the assembly of bonded solar modules

Steinhöfel, Christian – Supervisor: Dipl.-Wirt. Ing. H. Kuehl
Experimental determination of fatigue strength of centrically axially loaded lock bolt and blind rivet joints and their classification under the Eurocode 3

Triebel, Tom – Supervisor: Dr.-Ing. U. Kothe
Benefits of benchmarking analyses in maritime production

Vajen, Hermann – Supervisor: Dipl.-Wirt. Ing. J. Meißner
Development of a manufacturing layout for CNG tank modules on the basis of pressurised tubes

Bachelor thesis 2009

 

Dietrich, Peter – Supervisor: Dipl.-Ing. R. Bohnenberg
Developing and Systematization of Required Manufacturing Data for Work Preparation

Ebert, Andreas – Supervisor: Dipl.-Ing. M. Anders
Literature Research in Regard to UP Welding of High-Strength Quenched and Tempered Steels in the Plate Thickness Range of 20-100 mm

Ehrich, Kai – Supervisor: Dipl.-Ing. N. Sendker
Mechanical Testing of a Structural GRP-Adhesive Joint

Freund, Hannes – Supervisor: Dipl.-Ing. N. Sendker
Mechanical Testing of GRP-Winded Bar Structures

Hammerschmidt, Jan – Supervisor: Dipl.-Wirt. Ing. S. Heinrich
Development of an Integration Conception for the Dimensional Inspection in the Production Process of Extensive Aluminum Panels

Jandt, Martin – Supervisor: Dr.-Ing. R. Krause
Analysis and Evaluation of Welding Procedures for Aluminum in Regard to Shipbuilding Manufacturing

Klopsch, Vincent – Supervisor: Dipl.-Ing. (FH) U. Pfletscher
Conception for an Automatic Sorting and Separation Plant in Plate Cutting Based on a Catalog of Requirements and the State of the Art

Kraus, Oliver – Supervisor: Dipl.-Wirt. Ing. J. Sender
Contrasting Evaluation Methods for Production Layouts

Lerche, Alexander – Supervisor: Dipl.-Ing. R. Bohnenberg
Systematization of Information in CAD-Systems for Production Planning

Reiche, Claudia – Supervisor: Dipl.-Wirt. Ing. J. Sender
Comparison of Methods for the Determination of the Optimal Arrangement of Working Places

Röhrich, Vivien – Supervisor: Dipl.-Ing. R. Bohnenberg
Analysis of Energetic Saving Potentials in Steel Body Assembly

Schmalenberg, Jörg – Supervisor: Dipl.-Ing. A. Dörge
Application of Ceramic Backing in Large Section Assembly in Shipbuilding

Sülflow, Benjamin – Supervisor: Dr.-Ing. R. Czarnietzki
Evaluation of Strategies for Resource Reservation According to the Principle of the Earliest or Latest Possible Order Release Date

Weber, Steffi – Supervisor: Dipl.-Ing. R. Bohnenberg
Analysis of Potential Organization Variants of the Internal Transport between Different Organization Forms